26 • SECTION 2 — DRIVING & SAFETY
DYNASTY 2006
Mirror Adjusting:
• Adjust the driver seat to travel position.
• Use a fl at-head screwdriver to remove the screw caps from points A and B.
• Using a 3/16” Allen wrench, have the assistant loosen the two 3/16” set screws
located at the base of the mirror (see A on illustration).
• Adjust the mirror for a clear side view of the motorhome.
• Tighten the two base screws once proper adjustment is made.
• Use a 3/32” Allen wrench to loosen the camera (“See Vision” option only - C on
illustration). Adjust the camera angle and retighten.
• To adjust the head of the mirror, loosen the 3/16” set screw located at point B.
Adjust to the left or right.
• Ensure all the set screws are tight.
• Adjust the mirrors by using the Mirror Select switch to select the appropriate
mirror and Mirror Adjust to fi ne tune the view.
Safety Seat Belts
All occupants must be furnished with and use seat belts while the motorhome is moving. The driver’s seat,
and all other seats designed to carry passengers while the motorhome is in motion, are equipped with safety seat
belts. Do not occupy beds or seats that are not equipped with a safety belt while the motorhome is in motion. The
driver’s seat must be locked in the forward facing position while motorhome is in motion. Do not use a seat belt
on more than one person.
To fasten the seat belt, pull the belt out of the retractors and insert the tab into the buckle; you will hear a click
when the tab locks into the buckle. Seat belt lengths automatically adjust to your size and sitting position. Do not
route belts over armrest.
WARNING:
Safety belts are supplied at affixed seating positions. Do not occupy seats not equipped with
safety belts while the motorhome is in motion. Seat belts must only be used on permanently
mounted seats. Do not use a single seat belt on more than one person. Pilot and Co-pilot seats
must be locked in a forward facing position with seat belts fastened while the motorhome is
in motion. Avoid seat rotation while in transit.
Child Safety Seat:
Children that fi t into
Example 1
and
Example 2
(on following pages) require the use of a child safety seat. In
the motorhome, the child safety seat can be positioned in two places: the front passenger (co-pilot) seat and the
forward facing permanently mounted booth dinette seat.
WARNING:
Only forward facing booth dinette seats equipped with seat belts are designed for occupancy
while the motorhome is in motion.
WARNING:
Children must not be transported unrestrained. Infants must be placed in approved safety
seats. Small children must be restrained in child safety seats. Do not use a single seat belt on
more than one child. Failure to comply with these rules can lead to injury or death.
NOTE:
Individual states and Canadian provinces may have laws that can exceed the requirements
described above. It is your obligation to know and comply with the laws in the state or
province in which you travel.
030646
Summary of Contents for DYNASTY 2006
