© MOBATIME
28 / 52
801314.00
7
Control of the stopwatch using IR remote control
A 2-digit address is assigned to the stopwatch. With the IR remote control the stopwatch can
be locked. Controlling and the stopwatch parameter adjustment are only allowed in unlocked
state.
Function of the pushbuttons in the “Stopwatch“ mode
pushing the F1 entry
unlocking of a clock with the corresponding
of 2-digit address using numerical
address
pushbuttons
holding down the
F1
button
unlocking of all clocks within the reach of the IR
beam of the remote control
holding down the
F2
button
locking of all clocks within the reach of the IR
beam of the remote control
holding down the
F3
button
display of the addresses of all locked clocks
within the reach of the IR beam of the remote
control
CLOCK
visualisation of time
DATE
visualisation of date
TEMP
visualisation of temperature
TIMER
visualisation of the stopwatch
MENU
entry into stopwatch parameter setup menu
SET
entry into setting initial time of counting down
S/S, HOLD, RES
function depends on the stopwatch operation
mode set
7.1
The stopwatch menu
The stopwatch menu is entered by pushing
MENU
button (stopwatch must be
displayed). The parameter adjustment is shown in the stopwatch menu table
(chapter 8).
Function of the pushbuttons in the “Stopwatch Menu“ operation mode
>>
storing the current value and transition
to another menu item
<<
storing the current value and transition to
previous menu item
The
+
button
increase of the adjusted value in steps of 1
The
-
button
decrease of the adjusted value in steps of 1
Holding down the
+
button
continuous increase of the item set up
Holding down the
-
button
continuous decrease of the item set up
ESC
return into normal display mode,
OK
storage of the parameters; return into the
stopwatch display mode when counting up from
zero; or entry into the initial time setting mode
when counting down
