© MOBATIME
19 / 52
801314.00
4
Control of the clock using IR remote control
A 2-digit address is assigned to the clock. With the IR remote control the clock can be locked.
The setting of time, date and the clock parameters can only take place at clocks in an
unlocked state.
Function of the pushbuttons in normal display mode
pushing
F1
+ entry of 2-digit address,
unlock the clock with the
using numerical pushbuttons
corresponding address
holding down
F1
button
unlock all clocks within the reach of the IR
beam of the remote control unit
holding down
F2
button
lock all clocks within the reach of the IR
beam of the remote control unit
holding down
F3
button
display the address of all locked clocks within
the reach of the IR beam of the remote control
Function of the pushbuttons in the “Clock“ operation mode
SET
entry into the time and date setting mode
The
+
button
button brightness increase (not applicable when
P0
is set to
A
)
The
-
button
button brightness decrease (not applicable when
P0
is set to
A
)
CLOCK
visualisation of time
DATE
visualisation of date
TEMP
visualisation of temperature
TIMER
visualisation of stopwatch
MENU
entry into the menu of setting of clock
parameters
CLR
time correction to the whole minute (±30 sec)
4.1
Setting of time and date
The time and date values are adjusted in the following sequence: year – day –
month – hours – minutes. By pushing the
SET
button enter the time and date
setting mode.
The display shows the following:
The item to be set is blinking.
After having set up the minutes the value is blinking. By pushing the
OK
button
the value is stored (with seconds reset to zero) and the clock operation resumes.
The clock returns into normal working mode.
Function of the pushbuttons in the “Time and date setting“ mode
The
+
pushbutton
increase of the value adjusted, in steps of 1
The
–
pushbutton
decrease of the value adjusted, in steps of 1
Holding down the
+
button
continuous increase of the value set up