© MOBATIME
14 / 52
801314.00
3
Control of the clock using keyboard or pushbuttons
The clock is adjusted and controlled using two pushbuttons located on the control PCB. If you
use a keyboard for setting the stopwatch, then use the pushbuttons
PB1
and
PB2
for the
clock setting.
Abbreviations used for the key strokes
PB1L
,
PB2L
pushing the pushbutton for more than 1 second
PB1S
,
PB2S
pushing the pushbutton for less than 1 second
Function of the pushbuttons in the “Clock“ mode
PB1S
time correction to the whole minute (±30 sec)
PB2S
changeover of the displayed items
Time -> date -> temperature -> stopwatch -> time
PB1L
entry into the time and date setting mode
PB2L
entry into the clock menu
3.1
Setting of time and date
The setting of time and calendar date takes place in following steps: year – days
– months – hours – minutes. The entry into the time and date setting
mode occurs by pushing the
PB1L
pushbutton.
The display shows the following:
The item to be adjusted
is now blinking.
Move to another item by pushing the
PB1S
pushbutton. After having adjusted the
minutes and by pushing
PB1S,
the entered values are stored (the seconds are
set to zero) and the operation of the clock resumes. The clock returns into normal
working mode.
Function of the pushbuttons in the “Time and date setting“ mode.
PB1S
advancement to another item to be set up
PB2S
increase of the item to be set up by 1
PB2L
continuous increase of the current item
3.2
Menu for the setting of the clock parameters
The entry into the parameter setup menu is done by pushing the
PB2L
button.
