© MOBATIME
20 / 52
801314.00
Holding down the
–
button
continuous decrease of the value set up
ESC
return into normal display mode, without storage
of the data
>>
move to next parameter
<<
move to previous parameter
CLR
entry of zero or minimum value
OK
storage of values set up and return into normal
working mode, followed with seconds reset
Pushbuttons
0–9
entry of the corresponding numerical value
4.2
Menu for the setting of the clock parameters
The entry into the menu for the setting of the clock parameters is done be
pushing the
MENU
button.
The display shows the following:
The item to be set is blinking.
The options for the parameters to be set up are shown in the menu table on page
(chapter 5).
Function of the pushbuttons in the “MENU“ mode
>>
move to next menu item
<<
move to previous menu item
The
+
button increase of the value adjusted,
in steps of 1
The
-
button decrease of the current value,
in steps of 1
Holding down the
+
button
continuous increase of the value set up
Holding down the
–
button
continuous decrease of the value set up
ESC
return into the normal working mode,
without storing the modified items
OK
storing of the modified items and return
into the normal working mode
SET
enter the sub-menu, where it is possible
Pushbuttons
0–9
entry of the corresponding numerical value
Note: During entering the numbers in the octets
of the IP addresses the editing to the next digit
moves automatically.
