© MOBATIME
33 / 52
801314.00
P3 A
NTP protocol uses UTC time zone
P4 A
automatic
P6 0
No timezone server is used
P7 U1-U7 Display time and date according to chosen preconfigured
timezone entry, incl. daylight saving time
This setting is suitable for NTP digital clocks, where several user defined
timezone entries should be used. The timezone enties are preconfigured by
means of the MOBA-NMS software.
9.5
Calculation according to internal time zone table
This setting is suitable for autonomous digital clocks or in cases when the
displayed time in another time zone than the one provided by the synchronization
source is needed. Displayed time and date calculation is based on the internal
time zone table or on the user–specific time zone parameters. See the chapter
15 with actual Time zone definition table.
If you want to use the zone outside the internal time zone table, follow the
"Custom Time Zone settings" appendix.
P3
0 – 64
According to the time zone in which source of
synchronization works (e.g. value 2 for DCF in
west Europe)
P4
1 – 12,
A
Autonomous operation or any type of the
synchronizing signal
P6
0
Neither MOBALine time zone nor Timezone-
server are used
P7
0 – 64,
U
Display time and date by calculation from the
UTC time according to chosen time zone, incl.
daylight saving time
