© MOBATIME
38 / 52
801314.00
SNMP-Manager 1
0.0.0.0 / 0:0:0:0:0:0:0:0
SNMP-Manager 2
0.0.0.0 / 0:0:0:0:0:0:0:0
Multicast-Konfigurationsadresse
239.192.54.0
Alive-Benachrichtigungsintervall
[min]
30
Nummer Konfigurations-Port
65532
Nummer Zeitzonen-Client-Port
65534
DHCPv4
enabled
SNMP
enabled
Multicast-Unterstützung
enabled
Telnet
enabled
IPv6 fix address / prefix
0:0:0:0:0:0:0:0/ 64
IPv6 link local address
fe80::2[2. octet MAC]:[3.
octet MAC]ff:fe[4. octet MAC]:[5. octet
MAC][6. octet MAC]
DHCPv6
enabled
autoconfiguration (SLAAC)
enabled
11.1.1 Network parameters assignation by DHCP
The menu item
P19
must be set to value
3
(default). Network parameters are
automatically obtained from a DHCP server.
The following DHCP options will be evaluated automatically:
[50] IP address
[3] Gateway address
[1] Subnet mask
[42] list of up to four NTP server addresses / time zone server address (usually
the same as the NTP server address)
[6] DNS servers
[26] MTU
[60] Vendor Class ID
[43] or [224] Additional options (refer to document BE-800793)
The network administrator must configure the DHCPv4 options accordingly.
Assigned parameters can be checked in the submenu of items
P20
to
P22
.
11.1.2 Manual setting through setup menu
The menu item
P19
must be set to value
2
.
•
See chapter 4.2.4 for setting the clock’s IP address in the item
P20
submenu
•
See chapter 4.2.5 for setting the subnet mask in the item
P21
submenu
•
See chapter 4.2.6 for setting the gateway in the item
P22
submenu
•
See chapter 4.2.7 for setting the multicast group address in the item
P23
submenu
•
See chapter 4.2.8 for setting the unicast NTP server address in the item
P24
submenu.
11.1.3 Manual setting through telnet
•
connect to the clock and make the needed settings by windows command
telnet <IP address>
example: telnet 192.168.0.190
•
request for entering the password appears after connection (default password
is 718084)
•
the information about software and hardware version followed by the MAC
address is displayed after entering the correct password
