manualshive.com logo in svg

Mitsubishi Q2ACPU, User Manual

The Mitsubishi Q2ACPU is a high-performance automation controller designed for efficient industrial processes. Enhance your productivity with this reliable device that offers exceptional speed and intelligence. To understand the full capabilities of this product, download the free User Manual from manualshive.com. Your ultimate guide for maximizing its potential!

Share
Download
background image

Warranty

Please confirm the following product warranty details before using this product.

1. Gratis Warranty Term and Gratis Warranty Range

If any faults or defects (hereinafter "Failure") found to be the responsibility of Mitsubishi occurs during use of the 
product within the gratis warranty term, the product shall be repaired at no cost via the sales representative or 
Mitsubishi Service Company.
However, if repairs are required onsite at domestic or overseas location, expenses to send an engineer will be 
solely at the customer's discretion.  Mitsubishi shall not be held responsible for any re-commissioning, 
maintenance, or testing on-site that involves replacement of the failed module.
[Gratis Warranty Term]
The gratis warranty term of the product shall be for one year after the date of purchase or delivery to a designated 
place.
Note that after manufacture and shipment from Mitsubishi, the maximum distribution period shall be six (6) months, 
and the longest gratis warranty term after manufacturing shall be eighteen (18) months. The gratis warranty term of 
repair parts shall not exceed the gratis warranty term before repairs.
 [Gratis Warranty Range]
(1) The range shall be limited to normal use within the usage state, usage methods and usage environment, etc., 

which follow the conditions and precautions, etc., given in the instruction manual, user's manual and caution 
labels on the product.

(2) Even within the gratis warranty term, repairs shall be charged for in the following cases.

1. Failure occurring from inappropriate storage or handling, carelessness or negligence by the user. Failure 

caused by the user's hardware or software design.

2. Failure caused by unapproved modifications, etc., to the product by the user.
3. When the Mitsubishi product is assembled into a user's device, Failure that could have been avoided if 

functions or structures, judged as necessary in the legal safety measures the user's device is subject to or 
as necessary by industry standards, had been provided.

4. Failure that could have been avoided if consumable parts (battery, backlight, fuse, etc.) designated in the 

instruction manual had been correctly serviced or replaced.

5. Failure caused by external irresistible forces such as fires or abnormal voltages, and Failure caused by force 

majeure such as earthquakes, lightning, wind and water damage.

6. Failure caused by reasons unpredictable by scientific technology standards at time of shipment from 

Mitsubishi.

7. Any other failure found not to be the responsibility of Mitsubishi or that admitted not to be so by the user.

2. Onerous repair term after discontinuation of production

(1) Mitsubishi shall accept onerous product repairs for seven (7) years after production of the product is 

discontinued.
Discontinuation of production shall be notified with Mitsubishi Technical Bulletins, etc.

(2)  Product supply (including repair parts) is not available after production is discontinued.

3. Overseas service

Overseas, repairs shall be accepted by Mitsubishi's local overseas FA Center. Note that the repair conditions at 
each FA Center may differ.

4. Exclusion of loss in opportunity and secondary loss from warranty liability

Regardless of the gratis warranty term, Mitsubishi shall not be liable for compensation of damages caused by any 
cause found not to be the responsibility of Mitsubishi, loss in opportunity, lost profits incurred to the user by Failures 
of Mitsubishi products, special damages and secondary damages whether foreseeable or not , compensation for 
accidents, and compensation for damages to products other than Mitsubishi products, replacement by the user, 
maintenance of on-site equipment, start-up test run and other tasks.

5. Changes in product specifications

The specifications given in the catalogs, manuals or technical documents are subject to change without prior notice.

IB(NA)66608-F

Summary of Contents for Q2ACPU



























































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Q2ACPU

Haier YR-H71 Service Manual preview
YR-H71
Brand: Haier Pages: 58
Panasonic TY-RM50VW Operating Instruction preview
TY-RM50VW
Brand: Panasonic Pages: 72
Panasonic CZ-RTC5 Operating Instructions Manual preview
CZ-RTC5
Brand: Panasonic Pages: 45
Panasonic CZ-RWSU3 Operating Instructions Manual preview
CZ-RWSU3
Brand: Panasonic Pages: 24
D+H RZN 4503-T Original Instructions Manual preview
RZN 4503-T
Brand: D+H Pages: 36
D-Box HEMC Getting Started preview
HEMC
Brand: D-Box Pages: 4
D+H RZN 4416-M Manual preview
RZN 4416-M
Brand: D+H Pages: 36
Fagor CNC 8070 Original Instructions Manual preview
CNC 8070
Brand: Fagor Pages: 10
Fagor CNC 8070 Operating Manual preview
CNC 8070
Brand: Fagor Pages: 358
Fagor CNC 8070 Programming Manual preview
CNC 8070
Brand: Fagor Pages: 556
Fagor CNC 8060 Operating Manual preview
CNC 8060
Brand: Fagor Pages: 172
Fagor CNC 8060 Translation Of The Original Manual preview
CNC 8060
Brand: Fagor Pages: 180
Fagor CNC 8060 Hardware Configuration preview
CNC 8060
Brand: Fagor Pages: 112
FaderMate Master Control Unit Fittings Manual preview
Master Control Unit
Brand: FaderMate Pages: 36
Mamas & Papas Tour Instructions Manual preview
Tour
Brand: Mamas & Papas Pages: 24
Mamas & Papas 03 Sport Owner'S Manual preview
03 Sport
Brand: Mamas & Papas Pages: 24
D+H RZN 4402-K V2 Original Instructions Manual preview
RZN 4402-K V2
Brand: D+H Pages: 32
Acumen Model L Operating Instructions Manual preview
Model L
Brand: Acumen Pages: 6

Brands by name

Popular brands

Load more brands