Mitsubishi MOTORS Outlander Sport 2018 Owner'S Manual Download | Manualshive

Page: 98 / 353

background image

Theft-alarm system

Features and controls

5-35

5

The alarm will be activated if any of the fol-
lowing occur while the vehicle is parked and
the system is armed.



One of the doors and the liftgate is opened
without using the keyless entry system or
the F.A.S.T.-key operation.



The engine hood is opened.

When the alarm is activated:

1. The headlights blink on and off for 3 min-

utes.
After 3 minutes the headlights automati-
cally shut off.

2. The horn will sound intermittently for 3

minutes.

Type 1

Type 2

The alarm can be deactivated in the following
ways.



By using the keyless entry system or the
F.A.S.T.-key operation to lock or unlock
the doors and the liftgate.



Except for vehicles equipped with the
F.A.S.T.-key, by turning the ignition
switch to the “ON” position.



For vehicles equipped with the F.A.S.T.-
key, by putting the operation mode in ON.



The system will be disarmed if, while the
theft-alarm indicator is illuminated, the fol-
lowing operation is performed.
• Except for vehicles equipped with the

F.A.S.T.-key, if the ignition switch is turned
to the “ON” position.

• For vehicles equipped with the F.A.S.T.-

key, if the operation mode is put in ON.



The system will not be armed if a door, the
liftgate or the engine hood is not completely
closed. If this happens, rearm the system as
described above.



The theft-alarm system can be activated
when people are riding inside the vehicle or
when the windows are open. To prevent acci-
dental activation of the alarm, do not set the
system to the system armed mode while peo-
ple are riding in the vehicle.

Alarm stage

NOTE

Type of alarm

NOTE



The alarm will continue to operate for 3 min-
utes. At the end of that period, the alarm will
automatically shut off to save battery power.
The system will then be rearmed until the
proper disarming step is taken.



The alarm will resume if unauthorized
actions are taken again, even if the alarm has
stopped.

Horn sounds!
Headlights blink on and off!



While the alarm is operating, a warning is
displayed on the information screen in the
multi-information display.

Alarm deactivation

NOTE

BK0251800US.book 35 ページ２０１７年５月１８日　木曜日　午後２時４８分

«
...
96
97
98
99
100
...
»

Summary of Contents for Outlander Sport 2018


































































































































































































































































































































































Reviews:

No comments

Related manuals for Outlander Sport 2018

Brand: iDataLink Pages: 106

Brand: Jeep Pages: 5

Brand: Jeep Pages: 6

Grand Cherokee SRT 2014

Brand: Jeep Pages: 345

Grand Cherokee 2015

Brand: Jeep Pages: 236

Brand: Jeep Pages: 18

Brand: Jeep Pages: 24

Brand: Jeep Pages: 560

Brand: Jeep Pages: 525

Brand: Jeep Pages: 308

Brand: Jeep Pages: 86

Brand: Jeep Pages: 638

Brand: Jeep Pages: 9

Brand: Jeep Pages: 51

Brand: Jeep Pages: 4

Brand: Jeep Pages: 50

Grand Cherokee SRT 2014

Brand: Jeep Pages: 118

2014 Grand Cherokee

Brand: Jeep Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands