manualshive.com logo in svg

Mitsubishi MOTORS Outlander Sport 2018, Owner'S Manual

The Mitsubishi MOTORS Outlander Sport 2018 is a reliable and versatile SUV that offers an exceptional driving experience. To ensure optimal usage and maintenance, make sure to download the free Owner's Manual from our website. It provides valuable insights and guidelines for the best performance of your vehicle.

Share
Download
background image

Modifications to and racing of your vehicle

General information

3-5

3

7. To close, turn the fuel tank filler pipe cap

slowly clockwise until you hear clicking
sounds, then gently push the fuel tank
filler door closed.

N00301600149

This vehicle should not be modified with
non-Mitsubishi Motors genuine parts.
Mitsubishi Motors designs and manufactures
high quality vehicles with an emphasis on
safety and durability. Modifications using
non-Mitsubishi Motors genuine parts may
affect the performance, safety and/or durabil-
ity of your vehicle, and may violate applica-
ble state and/or federal regulations. 

DAMAGE OR PERFORMANCE PROB-
LEMS RESULTING FROM MODIFICA-
TIONS TO OR RACING OF YOUR
VEHICLE ARE NOT COVERED
UNDER WARRANTY. 

Examples of modifications to your vehicle
that can cause damage or performance prob-
lems include the following:

Failure to use Mitsubishi Motors genuine
parts

Failure to use required fuel and fluids

Failure to use proper size tires and wheels

Modification of the fuel, intake, exhaust,
emission, suspension, engine, drive train
or electrical wiring systems

Modification of any onboard com-
puter/control module, including repro-
gramming, or replacing/adding chips to
any onboard computer/control module

Review the Warranty and Maintenance Man-
ual for further details regarding warranty cov-
erage.

N00301701222

The installation of accessories, optional
parts, etc., should only be carried out
within the limits prescribed by law, and in
accordance with the guidelines and warn-
ings contained within the documents
accompanying this vehicle.

WARNING

Make sure the fuel tank filler cap is
securely closed. If the fuel cap were loose,
fuel could leak, resulting in a fire.

CAUTION

If you need to replace the fuel tank filler cap,
use only the cap specified for your model
vehicle.

NOTE

If the fuel tank filler cap is not tight while
driving, the engine malfunction indicator
(“SERVICE ENGINE SOON” or “Check
engine light”) may come on when the
onboard diagnostic (OBD) system performs
a self check.
Always tighten the fuel tank filler cap until
you hear at least 3 clicks.
The indicator will go off after driving several
times. If the indicator does not go off, con-
tact your authorized Mitsubishi Motors
dealer or a repair facility of your choice as
soon as possible.

Modifications to and racing 
of your vehicle 

Installation of accessories 

CAUTION

Before any electrical or electronic accesso-
ries are installed, consult an authorized
Mitsubishi Motors dealer.

Your vehicle is equipped with a diagnosis
connector (data link connector) for checking
and servicing the electronic control system.
Mitsubishi Motors does not recommend con-
necting a device other than the Scan Tool for
inspections and service to this connector
because an unexpected problem could result.
In addition, malfunctions caused by connect-
ing a device other than the Scan Tool may
not be covered under warranty.

BK0251800US.book  5 ページ  ２０１７年５月１８日　木曜日　午後２時４８分

Summary of Contents for Outlander Sport 2018


































































































































































































































































































































































Reviews:

No comments

Related manuals for Outlander Sport 2018

RAM 2015 1500 User Manual preview
2015 1500
Brand: RAM Pages: 292
RAM Trucks 1500 User Manual preview
Trucks 1500
Brand: RAM Pages: 116
Calix M5T 187A Assembly Instructions preview
M5T 187A
Brand: Calix Pages: 5
Blue Giant STRONGARM RVR303 Installation & Technical Manual preview
STRONGARM RVR303
Brand: Blue Giant Pages: 48
STO N SHO SNS135a Installation Procedures Manual preview
SNS135a
Brand: STO N SHO Pages: 7
I.D. Systems Vehicle Asset Communicator User Manual preview
Vehicle Asset Communicator
Brand: I.D. Systems Pages: 41
JCROffroad JEEP GL ADIATOR JT TOPPER ROOF RACK Install Instructions Manual preview
JEEP GL ADIATOR JT TOPPER ROOF RACK
Brand: JCROffroad Pages: 7
Vecow IVH-9000-2R440Q User Manual preview
IVH-9000-2R440Q
Brand: Vecow Pages: 110
Grillo PK 1400 Operator'S Manual preview
PK 1400
Brand: Grillo Pages: 71
Audiovox CDC-TO3 Installation Manual preview
CDC-TO3
Brand: Audiovox Pages: 2
Ford 2007 Transit Owner'S Handbook Manual preview
2007 Transit
Brand: Ford Pages: 46
GMC 2008 Acadia Getting To Know Manual preview
2008 Acadia
Brand: GMC Pages: 24
Audiovox CMT9300 Installation Manual preview
CMT9300
Brand: Audiovox Pages: 7
Parkmate RVM-043DVR User Manual preview
RVM-043DVR
Brand: Parkmate Pages: 16
Whispbar K144W Fitting Instructions Manual preview
K144W
Brand: Whispbar Pages: 78
Hotchkis 2205 Installation Instructions preview
2205
Brand: Hotchkis Pages: 5
Jegs ECONOAID 1002 Quick Start Manual preview
ECONOAID 1002
Brand: Jegs Pages: 2
Crux BEELINE Series Manual preview
BEELINE Series
Brand: Crux Pages: 8

Brands by name

Popular brands

Load more brands