Mitsubishi MOTORS Outlander Sport 2018, Owner'S Manual

Page: 204 / 353

Combination headlights and dimmer switch
Features and controls 5-141
5
[When the engine is not running, or when the
engine is started before the parking brake is
released]
N00532601593
 If the following operation is performed
with the combination headlights and dim-
mer switch in the “
” or “ ” position,
the lights automatically turn off.
[Except for vehicles equipped with the
F.A.S.T.-key]
The ignition switch is turned to the “OFF”
or “ACC” position or the key is removed
from the ignition switch and the driver’s
door is opened.
[For vehicles equipped with the F.A.S.T.-
key]
The operation mode is changed to OFF or
ACC and the driver’s door is opened.
When using a key to start the engine
• If the driver’s door is opened after the
key is removed from the ignition switch,
a high-pitched constant tone will sound
to remind you to turn off the lights.
• If the driver’s door is opened with the
key in the ignition switch, a low-pitched
beep will sound to remind you to remove
the key.
When using the F.A.S.T.-key to start
the engine
The daytime running lights illumi-
nated
Tail, front and rear side-marker
lights, license plate and instrument
panel lights on
Headlights and other lights on
NOTE
 Once the daytime running light come on,
they do not go out until the ignition switch is
turned to the “OFF” or “ACC” position or
the operation mode is changed to OFF or
ACC.
OFF All lights off
AUTO
Headlights and other lights turn on
and off automatically in accordance
with outside light level.
Parking, tail, front and rear side-
marker lights, license plate and
instrument panel lights on
Headlights and other lights on
NOTE
 Even if the daytime running lights are not on,
they will come on once the vehicle starts
moving.

Once the daytime running light come on,
they do not go out until the ignition switch is
turned to the “OFF” or “ACC” position or
the operation mode is changed to OFF or
ACC.
 The sensitivity of the automatic on/off con-
trol can be adjusted.
For further information, please contact your
authorized Mitsubishi Motors dealer or a
repair facility of your choice.

Do not cover the sensor (A) for the automatic
on/off control by affixing a sticker or label to
the windshield.
 If the lights do not turn on or off with the
switch in the “AUTO” position, manually
operate the switch. Have the system checked
by an authorized Mitsubishi Motors dealer or
a repair facility of your choice.
Light auto-cutout function
(headlights and other lights)
BK0251800US.book 141 ページ ２０１７年５月１８日 木曜日 午後２時４８分