manualshive.com logo in svg

Mitsubishi MOTORS Outlander Sport 2018, Owner'S Manual

The Mitsubishi MOTORS Outlander Sport 2018 is a reliable and versatile SUV that offers an exceptional driving experience. To ensure optimal usage and maintenance, make sure to download the free Owner's Manual from our website. It provides valuable insights and guidelines for the best performance of your vehicle.

Share
Download
background image

General maintenance

Vehicle care and maintenance

9-23

9

N00941000040

Check the hose surfaces for any heat and
mechanical damage, hard and brittle rubber,
cracking, tears, cuts and abrasions. Pay spe-
cial attention to the hoses closest to high heat
sources such as the exhaust manifold. Check
all the hose connections, such as clamps and
couplings, to make sure they are secure and
that there are no leaks. If you see any wear or
damage, replace the hoses immediately.

N00950100050

Have the valve clearance checked at an
authorized Mitsubishi Motors dealer at the
mileage specified in the “WARRANTY AND
MAINTENANCE MANUAL”.
If the engine sounds abnormally loud, have
adjustments made by an authorized
Mitsubishi Motors dealer.

N00941300173

Check these regularly for damage or leaks in
the fuel lines and connections. Check the fuel
tank filler cap for damage or looseness. Pay
special attention to the fuel lines closest to

high heat sources such as the exhaust mani-
fold.

N00941400187

If the fuel-vapor vent line is clogged or dam-
aged, the fuel-vapor mixture will escape, pol-
luting the air.
Have the system checked at an authorized
Mitsubishi Motors dealer at the mileage spec-
ified in the “WARRANTY AND MAINTE-
NANCE MANUAL”.

N00941500247

The next pages list the maintenance service
recommended by Mitsubishi Motors Corpo-
ration. In addition to the general maintenance
that needs to be performed at the times listed,

there are other parts which do not usually
need regular maintenance.
But, if any of these parts stops working prop-
erly, your vehicle performance could suffer.
Have these items checked if you notice a
problem with them.

See your authorized Mitsubishi Motors dealer
for assistance, if you have any questions.

N00941600059

Good brakes are essential for safe driving.
Check the brake pads for wear. For good
braking performance, replace the brake pads
with the same type pads as the originals.

N00941700076

Brake hoses and tubing should be checked
for:

Severe surface cracking, scuffing or worn
spots. If the fabric casing of the hose is
showing through any cracks or worn spots
in the rubber hose cover, the hose should
be replaced. The brakes can fail if the
hose wears through.

Improper installation may cause twisting,
or wheel, tire or chassis interference.

Fuel hoses 

Intake valve clearance 

Fuel system (tank, pipe line and 
connection, and fuel tank filler 
cap) 

WARNING

If you see a fuel leak or if you smell fuel,
do not run the engine. Any spark (includ-
ing from the ignition), flame or smoking
material could cause an explosion or fire.
Call an authorized Mitsubishi Motors
dealer or a repair facility of your choice
for assistance.

Evaporative emission control 
system (except evaporative 
emission canister) 

General maintenance 

Disc brake pads 

Brake hoses 

BK0251800US.book  23 ページ  ２０１７年５月１８日　木曜日　午後２時４８分

Summary of Contents for Outlander Sport 2018


































































































































































































































































































































































Reviews:

No comments

Related manuals for Outlander Sport 2018

Calix M5T 187A Assembly Instructions preview
M5T 187A
Brand: Calix Pages: 5
Whispbar K783W Fitting Instructions Manual preview
K783W
Brand: Whispbar Pages: 16
Suzuki Movano Owner'S Manual preview
Movano
Brand: Suzuki Pages: 353
Torklift F2012 Installation Instructions Manual preview
F2012
Brand: Torklift Pages: 16
Kia 2016 Cadenza Owner'S Manual preview
2016 Cadenza
Brand: Kia Pages: 419
Kia Picanto 2015 Quick Reference Manual preview
Picanto 2015
Brand: Kia Pages: 10
Uebler X21 nano Mounting And Operating Instructions preview
X21 nano
Brand: Uebler Pages: 56
AA Products SR-A260 Instruction Manual preview
SR-A260
Brand: AA Products Pages: 4
Jeep GLADIATOR 2022 Owner'S Manual preview
GLADIATOR 2022
Brand: Jeep Pages: 380
SAAS StreetLine Series Installation Instructions preview
StreetLine Series
Brand: SAAS Pages: 4
FALCON RIDGE HO-P500-FC04 Instructions For Installation And Care preview
HO-P500-FC04
Brand: FALCON RIDGE Pages: 8
Scosche 142HUD2 Manual preview
142HUD2
Brand: Scosche Pages: 8
Fab Fours H4550 Installation Instructions Manual preview
H4550
Brand: Fab Fours Pages: 13
Motoalliance Denali MA11705 Manual preview
Denali MA11705
Brand: Motoalliance Pages: 5
v.link VL2-MBN2 Manual preview
VL2-MBN2
Brand: v.link Pages: 12
Vauxhall Crossland X 2017 Owner'S Manual preview
Crossland X 2017
Brand: Vauxhall Pages: 245
Cadillac 2000 DeVille Service Manual Addendum preview
2000 DeVille
Brand: Cadillac Pages: 19
PEUGEOT BOXER 2018 Handbook preview
BOXER 2018
Brand: PEUGEOT Pages: 232

Brands by name

Popular brands

Load more brands