manualshive.com logo in svg

Mitsubishi MOTORS Outlander Sport 2018, Owner'S Manual

The Mitsubishi MOTORS Outlander Sport 2018 is a reliable and versatile SUV that offers an exceptional driving experience. To ensure optimal usage and maintenance, make sure to download the free Owner's Manual from our website. It provides valuable insights and guidelines for the best performance of your vehicle.

Share
Download
background image

Warning lights

5-136 Features and controls

5

N00568800023

This indicator will be displayed when fuel-
efficient driving is achieved.

N00520300147

N00520400470

This light comes on when the ignition switch
is turned to the “ON” position (engine off) or
the operation mode is put in ON.
When the engine is started, the light should
go off a few seconds later. A warning is also
displayed in the multi-information display.
The warning light also illuminates after start-
ing the engine under the following condi-
tions.

When the parking brake is still applied.

When the brake fluid level is low.

When the brake system circuit is not
working properly.

Before driving, be sure that the parking brake
is fully released and brake warning light is
off.

N00520500804

This indicator is a part of the onboard diag-
nostic (OBD) system which monitors the
emissions, engine control system or continu-
ously variable transmission (CVT) control
system. If a problem is detected in one of
these systems, this indicator illuminates or
flashes. When the ignition switch is turned to
the “ON” position or the operation mode is
put in ON, this indicator normally comes on
and goes off after the engine has started.

This indicator will come on if the fuel tank
filler cap is not properly tightened. If this
indicator comes on and stays on after refuel-
ing, stop the engine and check that the cap is
properly tightened. (Turn the cap clockwise
until you hear clicking sounds.)
If this indicator does not go off after several
seconds or lights up while driving, have the
system checked as soon as possible at an
authorized Mitsubishi Motors dealer or a
repair facility of your choice.

ECO mode indicator

 (if so 

equipped)

Warning lights 

Brake warning light 

CAUTION

If the brake warning light and the Anti-lock
braking system warning light are illuminated
at the same time, the braking force distribu-
tion function will not operate, so the vehicle
may be destabilized during sudden braking
under the following conditions.
• When the brake warning light does not go

out even when the parking brake is
released.

• When the brake warning light stays on

while driving.

• If the above occurs, avoid sudden braking

and high-speed driving. Park the vehicle in
a safe place, and contact an authorized
Mitsubishi Motors dealer or a repair facility
of your choice as soon as possible.

The vehicle should be brought to a halt in the
following manner when brake performance
is deteriorated.
• Confirm that the vehicle slows down when

you press down on the brake pedal harder
than usual. In some cases, the brake pedal
may go all the way to the floor.

• Should the brakes fail, use engine braking

to reduce your speed and slowly apply the
parking brake.
Depress the brake pedal to illuminate the
stop lights to alert the vehicles behind you.

Engine malfunction indicator 
(“SERVICE ENGINE SOON” 
or “Check engine light”) 

BK0251800US.book  136 ページ  ２０１７年５月１８日　木曜日　午後２時４８分

Summary of Contents for Outlander Sport 2018


































































































































































































































































































































































Reviews:

No comments

Related manuals for Outlander Sport 2018

Saab 99 Important Operatlng, Safety And Maintenance Instructions preview
99
Brand: Saab Pages: 75
Lancia Y Owner'S Handbook Manual preview
Y
Brand: Lancia Pages: 191
IAME Parilla X30 Assembly Instructions And User'S Manual preview
Parilla X30
Brand: IAME Pages: 17
Romik 2137 2D Installation Instructions Manual preview
2137 2D
Brand: Romik Pages: 6
Waeco MagicComfort MSH200 Installation And Operating Instructions Manual preview
MagicComfort MSH200
Brand: Waeco Pages: 108
Tusk RL-HM018R Installation Instructions And Information Manual preview
RL-HM018R
Brand: Tusk Pages: 2
Chevrolet 1999 Malibu Owner'S Manual preview
1999 Malibu
Brand: Chevrolet Pages: 344
Prorack K692 Fitting Instructions Manual preview
K692
Brand: Prorack Pages: 15
Cadillac Escalade ESV 2014 Owner'S Manual preview
Escalade ESV 2014
Brand: Cadillac Pages: 508
Hama Liberty III Quick Start Manual preview
Liberty III
Brand: Hama Pages: 2
MASCOT SMARTCHARGER User Manual preview
SMARTCHARGER
Brand: MASCOT Pages: 12
BMW M5 2014 Service And Warranty Information preview
M5 2014
Brand: BMW Pages: 38
VER-MAC PCMS Series Operation, Safety And Maintenance Manual preview
PCMS Series
Brand: VER-MAC Pages: 64
MULTILIFT ULTIMA S Installation Instructions Manual preview
ULTIMA S
Brand: MULTILIFT Pages: 62
Omix-Ada Alloy Rugged Ridge X-Clamp Manual preview
Alloy Rugged Ridge X-Clamp
Brand: Omix-Ada Pages: 2
Dodge 8W-70 Wiring Diagram preview
8W-70
Brand: Dodge Pages: 3
Vangear Woody-Pod Instruction Manual preview
Woody-Pod
Brand: Vangear Pages: 5
Safe Fleet FRC SafeTrack Hardware Installation Manual preview
FRC SafeTrack
Brand: Safe Fleet Pages: 20

Brands by name

Popular brands

Load more brands