manualshive.com logo in svg

Mitsubishi MOTORS Outlander Sport 2018, Owner'S Manual

The Mitsubishi MOTORS Outlander Sport 2018 is a reliable and versatile SUV that offers an exceptional driving experience. To ensure optimal usage and maintenance, make sure to download the free Owner's Manual from our website. It provides valuable insights and guidelines for the best performance of your vehicle.

Share
Download
background image

Genuine Mitsubishi Motors parts

3-6

General information

3

Only Mitsubishi Motors approved acces-
sories should be fitted to your vehicle.

Improper installation of electrical parts
could cause fire. Refer to the “Modifica-
tion/alterations to the electrical or fuel
systems” section within this owner’s man-
ual.

Using a cellular phone or radio set inside
the vehicle without an external antenna
may cause electrical system interference,
which could lead to unsafe vehicle opera-
tion.

Tires and wheels which do not meet spec-
ifications must not be used.
Refer to the “Specifications” section for
information regarding wheel and tire
sizes.

Due to the large number of accessory and
replacement parts provided by different man-
ufacturers in the market, it is not always pos-
sible for an authorized Mitsubishi Motors
dealer to check whether the attachment or
installation of non-Mitsubishi Motors genu-
ine parts affects the driving safety of your
Mitsubishi-vehicle.

N00301800138

Mitsubishi Motors manufactures high quality
vehicles with an emphasis on safety. It is
important to consult an authorized Mitsubishi
Motors dealer before installation of any
accessory which may involve modification of
the electrical or fuel systems.

N00301400219

Mitsubishi Motors Genuine Parts are
designed and manufactured to meet high stan-
dards of performance, and are recommended
for all of your maintenance needs. Also avail-
able from your Mitsubishi Motors dealer are
a wide variety of accessories to personalize
your new vehicle. Each Mitsubishi Motors
vehicle has a selection of Mitsubishi Motors
authorized accessories to choose from to tai-
lor your new vehicle to your own personal
preference. Your Mitsubishi Motors dealer’s
Parts Manager has information on various
audio systems, protection items, as well as
interior and exterior accessories available for
your specific model.

N00300100017

Certain components of this vehicle, such as
airbag modules, seat belt pretensioners, and
button cell batteries, may contain perchlorate
materials.
Special handling may apply. For additional
information, see www.dtsc.ca.gov/hazardous-
waste/perchlorate.

WARNING

While driving, do not use a cellular phone
in a way that hinders safe driving. Any-
thing, including cellular phone usage, that
distracts you from the safe operation of
your vehicle increases your risk of an acci-
dent.
Refer to and follow all state and local laws
in your area regarding cellular phone
usage while driving.

Important point! 

Modification/alterations to the 
electrical or fuel systems 

CAUTION

Please consult an authorized Mitsubishi
Motors dealer concerning any such acces-
sory fitment or modification.
If the wires interfere with the vehicle body or
improper installation methods are used (pro-
tective fuses not included, etc.), electronic
devices may be adversely affected, resulting
in a fire, vehicle damage, or other accident.

Genuine Mitsubishi Motors 
parts 

California Perchlorate 
Materials Requirements 

BK0251800US.book  6 ページ  ２０１７年５月１８日　木曜日　午後２時４８分

Summary of Contents for Outlander Sport 2018


































































































































































































































































































































































Reviews:

No comments

Related manuals for Outlander Sport 2018

Vauxhall INSIGNIA 2017 Owner'S Manual preview
INSIGNIA 2017
Brand: Vauxhall Pages: 323
Car-Interface CI-RL4-ELINK Manual preview
CI-RL4-ELINK
Brand: Car-Interface Pages: 23
RuggON VD04 Quick Start Manual preview
VD04
Brand: RuggON Pages: 2
NavLinkz RL2-SC14 Manual preview
RL2-SC14
Brand: NavLinkz Pages: 21
ULTIMATE SPEED 304669 Instructions For Use And Safety Manuallines preview
304669
Brand: ULTIMATE SPEED Pages: 50
N-Com Bluetooth Kit3 PLUS User Instructions And Safety preview
Bluetooth Kit3 PLUS
Brand: N-Com Pages: 36
FORM FIT 8F 00 Installation Instructions preview
8F 00
Brand: FORM FIT Pages: 2
Coulomb Technologies ChargePoint CT500-DSTAND Installation Manual preview
ChargePoint CT500-DSTAND
Brand: Coulomb Technologies Pages: 26
Rally Armor IMF63 Installation Instruction preview
IMF63
Brand: Rally Armor Pages: 4
Ford Mondeo 2007 Owner'S Handbook Manual preview
Mondeo 2007
Brand: Ford Pages: 292
Yakima MegaWarrior Instruction Manual preview
MegaWarrior
Brand: Yakima Pages: 8
OCAM SS2-RANGER-12 Fitting Instruction preview
SS2-RANGER-12
Brand: OCAM Pages: 4
Whispbar K807W Fitting Instructions Manual preview
K807W
Brand: Whispbar Pages: 43
HardWire HWP132A User Manual preview
HWP132A
Brand: HardWire Pages: 18
Honda 2011 odyssey EX-L Manual preview
2011 odyssey EX-L
Brand: Honda Pages: 722
Ford 2004 Ranger Owner'S Manual preview
2004 Ranger
Brand: Ford Pages: 24
Siemens OpenAir GND Series Technical Instructions preview
OpenAir GND Series
Brand: Siemens Pages: 7
Siemens VersiCharge Ultra 175 Maintenance Manual preview
VersiCharge Ultra 175
Brand: Siemens Pages: 12

Brands by name

Popular brands

Load more brands