manualshive.com logo in svg

Mitsubishi MOTORS Outlander Sport 2018, Owner'S Manual

The Mitsubishi MOTORS Outlander Sport 2018 is a reliable and versatile SUV that offers an exceptional driving experience. To ensure optimal usage and maintenance, make sure to download the free Owner's Manual from our website. It provides valuable insights and guidelines for the best performance of your vehicle.

Share
Download
background image

How to change a tire

8-10

For emergencies

8

8. Lower the vehicle slowly until the tire

touches the ground, by rotating the wheel
nut wrench counterclockwise.

9. Tighten the nuts in the order shown in the

illustration until each nut has been tight-
ened to the torque listed here.

65 to 80 ft-lb (88 to 108 N•m) 

10. Lower the jack all the way and remove it.

11. Check the tire inflation pressure. The rec-

ommended tire pressure for your vehicle
is listed on the tire and loading informa-
tion placard attached to the driver’s door
sill as shown in the illustration. Refer to
“Tire inflation pressures” on page 9-18.

CAUTION

Never apply oil to either the wheel bolts or
the nuts or they will tighten too much.

NOTE

Flange nuts can be temporarily used on the
compact spare or steel wheel, but return
them to the original wheel and tire as soon as
possible.

If all 4 wheels are changed to steel wheels,
use tapered nuts.

CAUTION

Never use your foot or a pipe extension to
apply added force to the wheel nut wrench
when tightening the wheel nuts. If you do so,
you can over-tighten the wheel nuts and
damage the wheel, wheel nuts and hub bolts.

CAUTION

Driving with an improperly inflated tire can
cause an accident. If you have no choice but
to drive with an under-inflated tire, keep
your speed down and avoid sudden steering
or braking, if possible. Inflate the tire to the
correct pressure as soon as possible. Refer to
“Tire inflation pressures” on page 9-18.

After changing the tire and driving the vehi-
cle about 620 miles (1,000 km), retighten the
wheel nuts to make sure that they have not
come loose.

BK0251800US.book  10 ページ  ２０１７年５月１８日　木曜日　午後２時４８分

Summary of Contents for Outlander Sport 2018


































































































































































































































































































































































Reviews:

No comments

Related manuals for Outlander Sport 2018

Abarth 595 Owner'S Handbook Manual preview
595
Brand: Abarth Pages: 176
GMC 2005 Sierra Denali Owner'S Manual preview
2005 Sierra Denali
Brand: GMC Pages: 428
Mercedes-Benz GLA 250 2019 Operator'S Manual preview
GLA 250 2019
Brand: Mercedes-Benz Pages: 346
Thule Kit 1514 Instructions preview
Kit 1514
Brand: Thule Pages: 4
M7 SPEED AGS-R2 Manual preview
AGS-R2
Brand: M7 SPEED Pages: 6
GARO Wallbox GLB Quick Start Manual preview
Wallbox GLB
Brand: GARO Pages: 15
Edelbrock 2917 Nstallation Instructions preview
2917 Nstallation
Brand: Edelbrock Pages: 1
iQOS CCU01 Safety Warnings And Instructions preview
CCU01
Brand: iQOS Pages: 4
JBA 1674S Installation Instructions preview
1674S
Brand: JBA Pages: 5
ADAPT SOLUTIONS ASENTO EV-EXP18R Installation Manual preview
ASENTO EV-EXP18R
Brand: ADAPT SOLUTIONS Pages: 25
Honda 2008 S2000 Manual preview
2008 S2000
Brand: Honda Pages: 280
Hollywood Racks HR4000 Assembly And Instruction Manual preview
HR4000
Brand: Hollywood Racks Pages: 8
Bracketron MVM Multi Vehicle Mount MVM-45-05 Installation Manual preview
MVM Multi Vehicle Mount MVM-45-05
Brand: Bracketron Pages: 4
Free2Move eSolutions ProWallbox Installation Manual preview
ProWallbox
Brand: Free2Move eSolutions Pages: 33
FORM FIT HD 24A 10 Manual preview
HD 24A 10
Brand: FORM FIT Pages: 4
Huawei Hall Quick Manual preview
Hall
Brand: Huawei Pages: 19
Motorola MT146 Owner'S Manual preview
MT146
Brand: Motorola Pages: 28
Bosch 0 275 007 025 Owner'S Manual preview
0 275 007 025
Brand: Bosch Pages: 33

Brands by name

Popular brands

Load more brands