manualshive.com logo in svg

Mitsubishi MOTORS Outlander Sport 2018, Owner'S Manual

The Mitsubishi MOTORS Outlander Sport 2018 is a reliable and versatile SUV that offers an exceptional driving experience. To ensure optimal usage and maintenance, make sure to download the free Owner's Manual from our website. It provides valuable insights and guidelines for the best performance of your vehicle.

Share
Download
background image

Power window control

5-36

Features and controls

5

The system will be disarmed if the following
operation is performed.

Except for vehicles equipped with the
F.A.S.T.-key, if the ignition switch is
turned to the “ON” position.

For vehicles equipped with the F.A.S.T.-
key, if the operation mode is put in ON.

All doors and the liftgate are unlocked by
using the keyless entry system or the
F.A.S.T.-key operation.

Use the following procedure to test the sys-
tem:

1. Lower the driver’s window.
2. Arm the system as explained in “Armed

stage”.

3. Make sure that the theft-alarm indicator

comes on and flashes for approximately
20 seconds.

4. Wait a few seconds and then unlock the

driver’s side door by using the inside door
lock knob and open the door.

5. Make sure that the horn sounds intermit-

tently and the headlights blink when a
door is opened.

6. Disarm the system by unlocking all doors

and the liftgate by using the keyless entry
system or the F.A.S.T.-key operation.

N00510800370

Disarmed stage 

NOTE

If the UNLOCK button on the remote control
transmitter, or the driver’s or front passen-
ger’s door lock/unlock switch is pressed
when all doors and the liftgate are closed and
no door is opened within approximately 30
seconds, re-arming will automatically occur.

Disarm...by the keyless entry system or the 
F.A.S.T.-key operation

The amount of time after unlocking until the
vehicle relocks automatically can be
adjusted. See an authorized Mitsubishi
Motors dealer for details.

Once the system has been disarmed, it can-
not be rearmed except by repeating the arm-
ing procedure.

Testing the theft-alarm system 

NOTE

Power window control 

1- Open (down)
2- Close (up)

NOTE

Never try to operate the main switch and
sub-switch in different directions at the same
time. This will freeze the window in posi-
tion.

Operating the power windows repeatedly
with the engine stopped will run down the
battery. Use the window switches only while
the engine is running.

WARNING

Before operating the power windows,
make sure that nothing can be trapped
(head, hands, fingers, etc.) in the window.

BK0251800US.book  36 ページ  ２０１７年５月１８日　木曜日　午後２時４８分

Summary of Contents for Outlander Sport 2018


































































































































































































































































































































































Reviews:

No comments

Related manuals for Outlander Sport 2018

Jeep 2011 grand cherokee Accessories Quick Reference Manual preview
2011 grand cherokee
Brand: Jeep Pages: 22
Jeep 2013 Grand Cherokee Owner'S Manual preview
2013 Grand Cherokee
Brand: Jeep Pages: 704
Jeep 2012 Liberty Owner'S Manual preview
2012 Liberty
Brand: Jeep Pages: 558
iDataLink maestro Pr 2 Install Manual preview
maestro Pr 2
Brand: iDataLink Pages: 99
Suzuki Movano Owner'S Manual preview
Movano
Brand: Suzuki Pages: 353
Torklift F2012 Installation Instructions Manual preview
F2012
Brand: Torklift Pages: 16
Compass 02106 Manual preview
02106
Brand: Compass Pages: 16
V8 equipment EBEX.2 Instruction Manual preview
EBEX.2
Brand: V8 equipment Pages: 17
Marlon Xplore Pro II SxS Owner’S Manual Assembly & Installation Instructions preview
Xplore Pro II SxS
Brand: Marlon Pages: 15
Calitop Calispace Ocean 80 Assembly Instructions preview
Calispace Ocean 80
Brand: Calitop Pages: 5
RAM 1500 2WD 2021 Owner'S Manual preview
1500 2WD 2021
Brand: RAM Pages: 496
tams elektronik FCS-4 Manual preview
FCS-4
Brand: tams elektronik Pages: 19
Xhorse VVDI User Manual preview
VVDI
Brand: Xhorse Pages: 48
Paccar DAF CHARGEMAX 90 User Manual preview
DAF CHARGEMAX 90
Brand: Paccar Pages: 40
Audiovox AA-BAT Programming Manual preview
AA-BAT
Brand: Audiovox Pages: 3
Victory 4x4 VRKCAP Install Instructions Manual preview
VRKCAP
Brand: Victory 4x4 Pages: 9
Whelen Engineering Company LED Dominator TAM83S2 Installation Manual preview
LED Dominator TAM83S2
Brand: Whelen Engineering Company Pages: 2
ULTIMATE SPEED 290923 Operation And Safety Notes preview
290923
Brand: ULTIMATE SPEED Pages: 56

Brands by name

Popular brands

Load more brands