manualshive.com logo in svg

Mitsubishi MOTORS Outlander Sport 2018, Owner'S Manual

The Mitsubishi MOTORS Outlander Sport 2018 is a reliable and versatile SUV that offers an exceptional driving experience. To ensure optimal usage and maintenance, make sure to download the free Owner's Manual from our website. It provides valuable insights and guidelines for the best performance of your vehicle.

Share
Download
background image

Supplemental Restraint System (SRS) - airbag

4-38

Seat and restraint systems

4

WARNING

Side airbags and curtain airbags can
cause serious injury or death to anyone
too close to the airbag when it deploys. To
reduce the risk of injury from a deploying
side airbag or curtain airbag, driver and
front passenger must be properly
restrained and seated well back, upright,
and in the middle of the seat. Do not lean
against the door.

WARNING

In order to reduce the risk of injury from
a deploying side airbag, do not allow any
rear seat passengers to hold onto the back
of either front seat. Special care should be
taken with children.

Do not place any objects around the area
where the side airbags deploy. Such
objects can interfere with proper side air-
bag deployment, and cause injury during
deployment of the side airbag.

Do not place stickers, labels or additional
trim on the back of either front seat. They
can interfere with proper side airbag
deployment.

Do not attach a microphone (A) or any
other object around the part where the
curtain airbag (B) deploys, such as on the
windshield, side door glass or front and
rear pillars and roof side rail. When the
curtain airbag inflates, the microphone or
other object may be hurled with great
force or the curtain airbag may not inflate
correctly, resulting in death or serious
injury.

WARNING

WARNING

Do not put a hanger or any heavy or
pointed object on the coat hook. If the cur-
tain airbag was activated, any such item
could be propelled away with great force
and could prevent the curtain airbag from
inflating correctly. Hang clothes directly
on the coat hook (without using a hanger).
Make sure there are no heavy or sharp
objects in the pockets of clothes that you
hang on the coat hook.

Do not install seat covers or re-cover seats
that have side airbags. Covers can inter-
fere with proper side airbag deployment
and adversely affect side airbag perfor-
mance.

Never install a rear-facing child restraint
system in the front passenger seat. Rear-
facing child restraint systems MUST
ONLY be used in the rear seat.

Front-facing child restraint systems
should also be used ONLY in the rear seat.
If a front-facing child restraint system
must be used in the front passenger seat,
move the seat as far back as possible, and
make sure that the child stays in the child
restraint system, properly restrained and
away from the door.

BK0251800US.book  38 ページ  ２０１７年５月１８日　木曜日　午後２時４８分

Summary of Contents for Outlander Sport 2018


































































































































































































































































































































































Reviews:

No comments

Related manuals for Outlander Sport 2018

N-Com B3 User Instructions And Safety preview
B3
Brand: N-Com Pages: 28
kaarta STENCIL PRO Assembly & Use preview
STENCIL PRO
Brand: kaarta Pages: 29
M7 SPEED R56 Installation Manual preview
R56
Brand: M7 SPEED Pages: 11
Zavoli Bora Technical Instructions And Installation Manual preview
Bora
Brand: Zavoli Pages: 26
Safe Fleet PRIME DESIGN VRI3-E-PM11 Manual preview
PRIME DESIGN VRI3-E-PM11
Brand: Safe Fleet Pages: 12
BendPak Autostacker PL-6SR Installation And Operation Manual preview
Autostacker PL-6SR
Brand: BendPak Pages: 104
Phonocar VM350 Mounting Instructions preview
VM350
Brand: Phonocar Pages: 2
Parkeon StradaPAL Installation Manual preview
StradaPAL
Brand: Parkeon Pages: 43
Car-Systems Parktronic system Volkswagen Golf MK7 Assembly Manual preview
Parktronic system Volkswagen Golf MK7
Brand: Car-Systems Pages: 10
Sanitas SMG 245 Instructions For Use Manual preview
SMG 245
Brand: Sanitas Pages: 36
Thule 1809 Instruction Manual preview
1809
Brand: Thule Pages: 4
Kia OPTIA hybrid 2020 Features & Functions Manual preview
OPTIA hybrid 2020
Brand: Kia Pages: 54
DEFA MultiCharger 1204 User'S Installation Manual preview
MultiCharger 1204
Brand: DEFA Pages: 28
Steelmate PTS800V7 User Manual preview
PTS800V7
Brand: Steelmate Pages: 14
Thule Kit 1312 Instructions Manual preview
Kit 1312
Brand: Thule Pages: 8
Z Flash OBD-II STALK User Manual preview
OBD-II STALK
Brand: Z Flash Pages: 4
Summit Racing SUM-G1083 Assembly & Use Instructions preview
SUM-G1083
Brand: Summit Racing Pages: 11
Griffin Technology iTrip Bluetooth User Manual preview
iTrip Bluetooth
Brand: Griffin Technology Pages: 6

Brands by name

Popular brands

Load more brands