Mitsubishi MOTORS Outlander Sport 2018 Owner'S Manual Download Page 31 | Manualshive

Page: 31 / 353

background image

Extending a luggage compartment

4-10

Seat and restraint systems

4

N00417801069

The passenger and luggage compartments can
be joined by folding the seatback forward.
This is useful for carrying long objects.
The seatbacks can be folded with the rear seat
release button.

Push the rear seat release button (A) to fold
the seatback forward.
The rear outboard seat belt can be separated
from the seat belt guide (B) to help prevent
damage to the seat belt while the seatback is
folded.

1. If the outboard seat belt has been sepa-

rated from the seat belt guide (B), insert it
back into the seat belt guide.

2. Tilt the seatback up until it is locked prop-

erly in position.

3. Make sure the seatback is locked securely

in place and the seat belt is passed through
the seat belt guide (B).



When adjusting the seats, be careful not to
catch your hand or leg. Personal injury could
result.

NOTE



When the seatback of a front seat is reclined,
return it to the upright position before driv-
ing.

Folding the rear seatbacks for-
ward

NOTE



You can separately fold the right and left side
of the seatback.

CAUTION

To fold the seatbacks

CAUTION



Before folding the driver’s side rear seat-
back, detach the center seat belt from the
detachable anchor and retract the center seat
belt all the way to the rear trim to prevent
damage to the seat belt caused by an object
in the luggage compartment. For details,
refer to page 4-14.

To return the seatbacks

WARNING



After returning the seatbacks to their
upright positions, make sure that the rear
seat belts are in front of the seatbacks, and
not caught behind the seatbacks.

NOTE



If the seat belt locks up and cannot be pulled
out, pull it once with force and let it retract
all the way. Then, pull the belt out slowly
once again.

WARNING



If the red part (C) on the back of the rear
seat release button can be seen, the seat-
back is not locked firmly in place. Push
and pull lightly on the seatback to lock it
firmly in place.

BK0251800US.book 10 ページ２０１７年５月１８日　木曜日　午後２時４８分

«
...
29
30
31
32
33
...
»

Summary of Contents for Outlander Sport 2018


































































































































































































































































































































































Reviews:

No comments

Related manuals for Outlander Sport 2018

Brand: Cadillac Pages: 20

Brand: Cadillac Pages: 2

Brand: Cadillac Pages: 494

Brand: Cadillac Pages: 500

Brand: Cadillac Pages: 40

Brand: Cadillac Pages: 432

Brand: Cadillac Pages: 338

Brand: Cadillac Pages: 20

Brand: Cadillac Pages: 438

Brand: Barker Pages: 2

Brand: DEFA Pages: 9

Slim Line LED Light Grille Kit

Brand: rough country Pages: 8

Brand: Subaru Pages: 21

DLD Wide Range II

Brand: VDO Pages: 84

TravelCharge Companion GO-Plus

Brand: Wagan Pages: 3

Brand: Jeep Pages: 380

Brand: Jaeger Pages: 17

Brand: Nav TV Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands