Mitsubishi MOTORS Outlander Sport 2018, Owner'S Manual

Page: 262 / 353

Automatic air conditioning-Type1 (if so equipped)
Comfort controls 7-11
7
 Recirculated air {Indicator light (A) ON}
Air is recirculated inside the passenger
compartment.
When the air conditioning turns on, the air
selection is controlled automatically. When
the air conditioning turns off, the air selection
automatically goes back to the outside air
position.
If high cooling performance is desired, or if
the outside air is dusty or contaminated in
some way, use the recirculation position.
Switch to the outside air position every now
and then to keep the windows from fogging
up.
N00760001103
You can change the following functions to
match your preference.
 Enable automatic air control:
When the mode selection dial or the
blower speed selection dial is set to the
“AUTO” position, the air selection switch
will also be automatically controlled.
 Disable automatic air control:
Even when the mode selection dial or the
blower speed selection dial is set to the
“AUTO” position, the air selection switch
will not be automatically controlled.
 Changing the settings
Press the air selection switch for about 10
seconds or longer.
When the setting has changed, the system
will beep and the indicator light will flash.
• When the setting has changed from
enabled to disabled, the system will beep
three times and the indicator will flash
three times.
• When the setting has changed from dis-
abled to enabled, the system will beep
two times and the indicator light will
flash three times.
N00737301412
Push the switch, and the air conditioning
compressor will turn on. The air conditioning
indicator light (A) will come on.
A sound will be made every time you push
the switch.
CAUTION
 Using recirculated air for a long time may
cause the windows to fog up.
NOTE
 If the mode selection dial is set between
“
” and “ ”, you cannot turn the air con-
ditioning off or select the recirculation posi-
tion.
This prevents the windows from fogging up.
 When the mode selection dial or the blower
speed selection dial is set to the “AUTO”
position again after manual operation, the air
selection switch will also be automatically
controlled.
Personalizing the air selection
(Changing the function setting)
NOTE
 The factory setting is “Enable automatic air
control”.

While the mode selection dial is set between
“
” and “ ” position, the air selection
will automatically change to the outside air
position, even if the system is set to “Disable
automatic air control”, in order to prevent
windows from fogging up.
Air conditioning switch
BK0251800US.book 11 ページ ２０１７年５月１８日 木曜日 午後２時４８分