manualshive.com logo in svg

Mitsubishi MOTORS Outlander Sport 2018, Owner'S Manual

The Mitsubishi MOTORS Outlander Sport 2018 is a reliable and versatile SUV that offers an exceptional driving experience. To ensure optimal usage and maintenance, make sure to download the free Owner's Manual from our website. It provides valuable insights and guidelines for the best performance of your vehicle.

Share
Download
background image

Fusible links

Vehicle care and maintenance

9-25

9

the windshield, side and rear window are also
useful.

N00942700305

The fusible links will melt to prevent a fire if
a large current attempts to flow through cer-
tain electrical systems.
In case of a melted fusible link, see your
authorized Mitsubishi Motors dealer or a
repair facility of your choice for inspection
and replacement.
For the fusible links, please refer to “Fuse
load capacities” on page 9-26.

N00942800856

To prevent damage to the electrical system
from short-circuiting or overloading, each
individual circuit is equipped with a fuse. The

fuse blocks are located in the passenger com-
partment and in the engine compartment.

The fuse blocks in the passenger compart-
ment are located behind the fuse lid.

1. Insert a screwdriver into the notch of the

fuse lid and pry gently to remove it.

2. To put back the fuse lid, line up the fuse

lid hook (A) with the clamp (B) on the
instrument panel and push the lid back in. 

Fusible links 

WARNING

Fusible links must not be replaced by any
other device. Failing to fit the correct fus-
ible link may result in fire in the vehicle,
property destruction and serious or fatal
injuries at any time.

Fuses 

Fuse block location 

Passenger compartment 

A- Main fuse block

B- Sub fuse block

Main fuse block

BK0251800US.book  25 ページ  ２０１７年５月１８日　木曜日　午後２時４８分

Summary of Contents for Outlander Sport 2018


































































































































































































































































































































































Reviews:

No comments

Related manuals for Outlander Sport 2018

Metra Electronics 99-3010S Installation Instructions Manual preview
99-3010S
Brand: Metra Electronics Pages: 14
RAM Commercial PROMASTER 2020 Quick Reference Manual preview
PROMASTER 2020
Brand: RAM Commercial Pages: 12
NavLinkz CAM-N-CV133-V Manual preview
CAM-N-CV133-V
Brand: NavLinkz Pages: 4
Cadillac ESCALADE FAMILY - SPECIFICATIONS 2011 Specifications preview
ESCALADE FAMILY - SPECIFICATIONS 2011
Brand: Cadillac Pages: 1
Brodit ProClip 804438 Installation Instructions preview
ProClip 804438
Brand: Brodit Pages: 2
Whispbar K728W Fitting Instructions Manual preview
K728W
Brand: Whispbar Pages: 85
PAC Stinger ELEV8 Install Manual preview
Stinger ELEV8
Brand: PAC Pages: 14
Kolpin 98310 Product Instructions preview
98310
Brand: Kolpin Pages: 3
Ranger design 1506-PHX Cargo Plus Installation Manual preview
1506-PHX Cargo Plus
Brand: Ranger design Pages: 8
AUTOTECH 10.411.01.219K Installation Instructions preview
10.411.01.219K
Brand: AUTOTECH Pages: 1
Mercedes-Benz 240 D 1979 Owner'S Manual preview
240 D 1979
Brand: Mercedes-Benz Pages: 91
Audi Audi 80 1987 Workshop Manual preview
Audi 80 1987
Brand: Audi Pages: 63
Gator GT700SD User Manual preview
GT700SD
Brand: Gator Pages: 6
F.lli Menabo CROSS 2 Assembly Instructions Manual preview
CROSS 2
Brand: F.lli Menabo Pages: 16
Jeep WRANGLER 2017 User Manual preview
WRANGLER 2017
Brand: Jeep Pages: 292
Cadillac 2000 DeVille Service Manual Addendum preview
2000 DeVille
Brand: Cadillac Pages: 19
Whispbar K684W Fitting Instructions Manual preview
K684W
Brand: Whispbar Pages: 15
Renault CAPTUR 2019 Vehicle Instruction Card preview
CAPTUR 2019
Brand: Renault Pages: 11

Brands by name

Popular brands

Load more brands