Mitsubishi MOTORS Outlander 2018, Owner'S Manual

Page: 303 / 441

Wiper and washer switch
5-222 Features and controls
5
With the lever in the “AUTO” position, it is
possible to adjust the sensitivity of the rain
sensor by turning the knob (B). Move the lever in the direction of the arrow
and release, to operate the wipers once.
Use this function when you are driving in
mist or drizzle.
The wipers will operate once if the lever is
raised to the “MIST” position and released
when the ignition switch or the operation
mode is in ON or ACC. The wipers will con-
tinue to operate while the lever is held in the
“MIST” position.
The wipers will operate once if the lever is
moved to the “AUTO” position and the knob
(C) is turned in the “+” direction when the
ignition switch or the operation mode is in
ON.
To adjust the sensitivity of the rain sensor
“+”- Higher sensitivity to rain
“-”- Lower sensitivity to rain
NOTE
 Automatic wiper operation (rain sensitive)
can be changed to intermittent operation,
either vehicle speed sensitive or not vehicle
speed sensitive.
For further information, please contact your
authorized Mitsubishi Motors dealer or a
repair facility of your choice.
On vehicles equipped with the Smartphone
Link Display Audio, screen operations can
be used to make the adjustment.
Refer to the separate owner’s manual for
details.
Misting function
BK0249100US.book 222 ページ ２０１７年５月１０日 水曜日 午前８時４９分