Mitsubishi MOTORS Outlander 2018, Owner'S Manual

Page: 214 / 441

Rear Cross Traffic Alert (RCTA) (if so equipped)
Features and controls 5-133
5
1. Press the Blind Spot Warning switch
while the operation mode is put in ON.
(Refer to “Blind Spot Warning (BSW): To
operate” on page 5-128.)
2. When the selector lever is moved to the
“R” (REVERSE) position, the RCTA will
operate.
If the system detects a problem, a warning is
displayed on the information screen in the
multi-information display.
Refer to “Blind Spot Warning (BSW): Sys-
tem problem warning” on page 5-129.
N00594000042
For vehicles sold in U.S.A.
FCC ID:OAYSRR3A
This device complies with Part 15 of FCC
Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful inter-
ference, and
(2)this device must accept any interference
received, including interference that may
cause undesired operation.
For vehicles sold in Canada
Applicable law: Canada 310
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (1)
this device may not cause interference, and
(2) this device must accept any interference,
including interference that may cause unde-
sired operation of the device.
Frequency bands: 24.05 - 24.25GHz
Output power: less than 20 milliwatts
To operate
NOTE
 Set the RCTA to OFF when towing.
 The Blind Spot Warning light in the outside
rearview mirror may not look due to strong
direct sunlight or the glare from the head-
lights of vehicles behind you during night
driving.
When a problem is detected in
the system
General information
CAUTION
 Changes or modifications not expressly
approved by the manufacturer for compli-
ance could void the user’s authority to oper-
ate the equipment.
BK0249100US.book 133 ページ ２０１７年５月１０日 水曜日 午前８時４９分