Mitsubishi MOTORS Outlander 2018, Owner'S Manual

Page: 41 / 441

Head restraints
4-12 Seat and restraint systems
4
To reduce the risk of injury in an accident,
adjust the head restraint height so that the
center of the restraint is at your ear level
when seated. Any person too tall for the
restraint to reach their ear level when seated
should raise the restraint to the highest locked
position.
 To raise the restraint, pull it straight up.
 To lower the restraint, push down on it
while pressing the lock knob (A) in the
direction shown by the arrow.
 After adjusting the height, push down on
the restraint to make sure it is locked in
position.
Press the lock knob (A) in the direction
shown by the arrows. Then pull the head
restraint up and out of the seatback.
First check that the head restraint is facing in
the right direction as shown in the previous
illustration, and then insert it into the seat-
back. Push the head restraint down while
pressing the lock knob (A) until the restraint
locks into place.
Adjustment of the head
restraint height (front seats) To remove
WARNING
 To help minimize the risk of neck injury in
the event of an accident, the head
restraints must be properly installed and
positioned to proper height before vehicle
operation.
To install
CAUTION
 Check that the lock knob (A) is extended out
as shown in the illustration. Then pull the
head restraint up to make sure that it is
locked in place and will not come out of the
seatback.
CAUTION
 The shape and size of the head restraint dif-
fers according to the seat. Always use the
correct head restraint provided for the seat
and do not install the head restraint in the
wrong direction.
BK0249100US.book 12 ページ ２０１７年５月１０日 水曜日 午前８時４９分