Mitsubishi MOTORS Outlander 2018, Owner'S Manual

Page: 130 / 441

Power window control
Features and controls 5-49
5
N00510601157
Use the following procedure to test the sys-
tem:
1. Lower the driver’s window.
2. Arm the system as explained in “Armed
stage”.
3. Make sure that the theft-alarm indicator
comes on and flashes for approximately
20 seconds.
4. Wait a few seconds and then unlock the
driver’s side door by using the inside door
lock knob. Open the door.
5. Make sure that the horn sounds intermit-
tently and the headlights blink when a
door is opened.
6. Disarm the system by unlocking all doors
and the liftgate by using the keyless entry
system or the F.A.S.T.-key operation.
N00510800383
Testing the theft-alarm system Power window control
1- Open (down)
2- Close (up)
NOTE
 Never try to operate the main switch and
sub-switch in different directions at the same
time. This will freeze the window in posi-
tion.
 Operating the power windows repeatedly
with the engine stopped will run down the
battery. Use the window switches only while
the engine is running.
WARNING
 Before operating the power windows,
make sure that nothing can be trapped
(head, hands, fingers, etc.) in the window.
 Never leave the vehicle without carrying
the key.
 Never leave children or unreliable adults
unattended inside the vehicle.
WARNING
BK0249100US.book 49 ページ ２０１７年５月１０日 水曜日 午前８時４９分