Mitsubishi MOTORS Outlander 2018, Owner'S Manual

Page: 92 / 441

Keyless entry system (if so equipped)
Features and controls 5-11
5
5. To register the ID codes of additional
remote control transmitters, repeat step 4
within 60 seconds after step 4.
6. If no ID code of a remote control trans-
mitter is registered within 60 seconds
after step 4, the registration mode is can-
celed and the normal mode returns.
N00546101124
Your keyless entry system operates on a radio
frequency subject to Federal Communica-
tions Commission (FCC) Rules (For vehicles
sold in U.S.A.) and Industry Canada Rules
(For vehicles sold in Canada). This device
complies with Part 15 of FCC Rules and
Industry Canada licence-exempt RSS stan-
dard(s).
Operation is subject to the following two con-
ditions.
 This device may not cause harmful inter-
ference.
 This device must accept any interference
received, including interference that may
cause undesired operation.
N00544101205
1. Before replacing the battery, remove static
electricity from your body by touching a
metal grounded object.
NOTE
 For verification purposes, try to lock and
unlock the doors after the registration is
completed.
 The indicator light (4) comes on each time a
button is pressed.
 The keyless entry system does not work if
the key is in the ignition switch.
 The remote control transmitter can be used
from approximately 40 feet (12 m) away.
However, this distance may change if your
vehicle is near a TV transmitting tower, a
power station, or a radio station.
 If the UNLOCK button (2) is pressed when
all doors and the liftgate are locked and no
doors or the liftgate are opened within
approximately 30 seconds, the doors and the
liftgate will automatically re-lock.
On a vehicle equipped with the Smartphone
Link Display Audio, the functions can be
adjusted on the screen. For details, refer to
the separate owner’s manual.
 If the following conditions are observed after
pressing the LOCK (1) or UNLOCK (2) but-
ton on the remote control transmitter, the
battery in the remote control transmitter may
need to be replaced.
• The doors and the liftgate cannot be locked
or unlocked.
• The panic alarm cannot be operated.
• The indicator light (4) is dim or does not
come on.
 If you lose your remote control transmitter,
please contact an authorized Mitsubishi
Motors dealer for a replacement.
 If you wish to obtain an additional remote
control transmitter, please contact an autho-
rized Mitsubishi Motors dealer. A maximum
of 8 remote control transmitters can be pro-
grammed for your vehicle.
 To use the new remote control transmitters, it
is necessary to register the key with both the
electronic immobilizer and keyless entry sys-
tem.
Also refer to “Electronic immobilizer (Anti-
theft starting system): Customer key pro-
gramming” on page 5-6.
General information
NOTE
CAUTION
 Changes or modifications not expressly
approved by the manufacturer for compli-
ance could void the user’s authority to oper-
ate the equipment.
Procedure for replacing the
remote control transmitter bat-
tery
BK0249100US.book 11 ページ ２０１７年５月１０日 水曜日 午前８時４９分