Mitsubishi MOTORS Outlander 2018, Owner'S Manual

Page: 168 / 441

S-AWC (Super-All Wheel Control) (if so equipped)
Features and controls 5-87
5
If you press the switch, you can change the
drive mode in the order of AWC ECO, NOR-
MAL, SNOW, LOCK, AWC ECO.
N00583100030
The currently selected drive mode is dis-
played on the multi-information display.
In addition, when the drive mode is changed,
the selected mode appears on the interrupt
display screen of the information screen in
the multi-information display.
The drive mode display will appear on the
information screen for a few seconds, and
then the original screen will return.
N00542501074
The S-AWC operation status can be displayed
on the information screen in the multi-infor-
mation display.
To display the status, press the multi-informa-
tion meter switch to change the information
screen.
Refer to “Information screen (With the igni-
tion switch or the operation mode in ON)” on
CAUTION
 Do not operate the drive mode-selector with
the front wheels spinning on a snowy road or
in similar conditions. The vehicle could
lunge in an unexpected direction.

Driving on dry, paved roads in “LOCK”
mode causes increased fuel consumption and
noise.
NOTE
 The drive mode can be switched while driv-
ing or stopped.
S-AWC drive mode display
Example: “AWC ECO” mode is selected.
CAUTION
 If the selected drive mode indicator begins
blinking, the drive mode will automatically
switch to protect the drive-system compo-
nents. A warning will also be displayed in
the information screen in the multi informa-
tion display.
Warning display
Reduce speed and, if the indicator stops
blinking, you may resume normal driving.
 If the drive mode indicator (4WD) is blink-
ing, a problem has occurred with the S-
AWC. A warning will also be displayed in
the information screen in the multi informa-
tion display.
Warning display
Have your vehicle inspected by an autho-
rized Mitsubishi Motors dealer.
 Make sure that all four tires are the same
specified size, type, and brand, and have no
significant difference in the amount of wear
for all 4 wheels. Otherwise, the S-AWC sys-
tem may not work properly, and a 4WD sys-
tem warning (overheating or service
required) may be displayed.
S-AWC operation display
CAUTION
BK0249100US.book 87 ページ ２０１７年５月１０日 水曜日 午前８時４９分