Mitsubishi MOTORS Outlander 2018, Owner'S Manual

Page: 409 / 441

Replacement of light bulbs
9-32 Vehicle care and maintenance
9
N00943000132
The bulb should only be replaced with a new
bulb with the same rating and type. The type
and rating are listed on the base of the bulb.
N00950302072
NOTE
 If you are unsure of how to carry out the
work as required, it is recommended that
these procedures be carried out by an autho-
rized Mitsubishi Motors dealer or a repair
facility of your choice.
 Be careful not to scratch the vehicle body
when removing a light and lens.
 When it rains, or when the vehicle has been
washed, the inside of the lens sometimes
becomes temporarily foggy. This is the same
phenomenon as when window glass mists up
on a humid day, and does not indicate a func-
tional problem.
When the light is switched on, the heat will
remove the fog. However, if water gathers
inside the light, please have it checked by an
authorized Mitsubishi Motors dealer or a
repair facility of your choice.
Bulb capacity
Outside
Type A: Halogen headlights type
Type B: LED headlights type
Front
Type A
Type B
Item
Watt-
age
ANSI
Trade
No. or
Bulb
type
1 - Front turn signal light 21 W PY21W
2 - Headlight, high beam 60 W
9005
HB3
3 - Head-
light, low
beam
Halogen
bulb
55 W H7
LED — —
4 - Parking light/
Daytime running
light — —
5 - Front side-marker
light
5 W W5W
6- Front fog
light (if so
equipped)
Halogen
bulb
19 W H16
LED — —
7 - Side turn signal light
(if so equipped)
— —
NOTE
 The following lights use an LED instead of
the bulb.
Check with an authorized Mitsubishi Motors
dealer or a repair facility of your choice
when either light needs to be repaired or
replaced.
BK0249100US.book 32 ページ ２０１７年５月１０日 水曜日 午前８時４９分