Mitsubishi MOTORS Outlander 2018, Owner'S Manual

Page: 206 / 441

Forward Collision Mitigation System (FCM) (if so equipped)
Features and controls 5-125
5
If the FCM detects a malfunction in the sys-
tem, either of the following messages will
appear, the
indicator will appear on the
information screen of the multi-information
display and the FCM will automatically be
turned off.
If the message remains even after the opera-
tion mode is put in “OFF” and then turned
back to “ON”, please contact your authorized
Mitsubishi Motors dealer.
N00593400049
The sensor (A) is located inside the wind-
shield as shown in the illustration.
The sensor is shared in the following sys-
tems:
 FCM
 Lane Departure Warning (LDW)
 Automatic high beam system
NOTE
 If the sensor or its surrounding area becomes
extremely high temperature when parking
the vehicle under a blazing sun, the “FCM
SERVICE REQUIRED” message may
appear.
After the temperature of the sensor or its sur-
rounding area has been in range, if the mes-
sage remains even after restarting the engine,
please contact an authorized Mitsubishi
Motors dealer.
Handling of the sensor
CAUTION
 To maintain proper performance of the FCM,
LDW and Automatic high beam system;
• Always keep clean the windshield.
If the inside of the windshield where the
sensor is installed becomes dirty or fogged,
contact an authorized Mitsubishi Motors
dealer.
• Do not apply an impact or load on the sen-
sor or its surrounding area.
BK0249100US.book 125 ページ ２０１７年５月１０日 水曜日 午前８時４９分