Mitsubishi MOTORS Outlander 2018, Owner'S Manual

Page: 250 / 441

Multi Information display - Type 1
Features and controls 5-169
5
 When the engine switch or the operation
mode is in the following conditions, the
average fuel consumption display and the
average speed display will automatically
reset.
[Except for vehicles equipped with the
F.A.S.T.-key]
The ignition switch has been set to the
“ACC”, “LOCK” or “OFF” position for
about 4 hours or more.
[For vehicles equipped with the F.A.S.T.-
key]
The operation mode has been in ACC or
OFF for about 4 hours or more.
N00557101166
The fuel consumption display unit can be
changed. The distance, speed, and amount
units are also changed to match the selected
fuel consumption unit.
1. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
to change from the setting mode screen to
the menu screen.
Refer to “Changing the function settings”
on page 5-167.
2. Lightly press the multi information dis-
play switch to select “AVG UNIT” (fuel
consumption display unit setting).
3. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
to display “AVG UNIT” (fuel consump-
tion display unit setting).
4. Lightly press the multi information dis-
play switch to switch to select the units.
5. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
to change the setting to the selected unit.
The distance and speed units are also changed
in the following combinations to match the
selected fuel consumption unit.
NOTE
 The average fuel consumption display and
average speed display can be reset separately
in both auto reset mode and manual reset
mode.
 Disconnecting the battery cable will erase
from memory the manual reset mode or auto
reset mode setting for the average speed dis-
play and average fuel consumption display.
 The initial (default) setting is “Auto reset
mode”.
Changing the fuel consumption
display unit
NOTE
 The display units for the driving range, the
average fuel consumption, the average speed
and the momentary fuel consumption are
changed, but the units for the indicating nee-
dle (speedometer), the odometer and the trip
odometer will remain unchanged.
 If the battery is disconnected, the memory of
the unit setting is erased and is automatically
set to {mpg (US) or L/100 km}.
Fuel
economy
Distance
(driving
range)
Speed
(average
speed)
mpg (US) mile (s) mph
mpg (UK) mile (s) mph
km /L km km /h
L /100 km km km /h
BK0249100US.book 169 ページ ２０１７年５月１０日 水曜日 午前８時４９分