－
28
－
1
Tap the Menu button on the TOP screen and select Useful functions
⇒
Individual flap control
, or
tap the
Change flap direction
button on the TOP screen and select
Ind. flap control
, and then enter the
administrator password.
When one IU is connected to the R/C:
☞
3
When two or more IUs are connected to the R/C:
☞
2
Motion range (upper, lower, left, or right limit positions) of the flap at each blow outlet can be set to a desired range.
■
When the R/C is set as the sub R/C, the individual flap control cannot be set.
Individual flap control
・
Individual flap control should be set when the unit is stopped.
・
When you perform Individual flap control while the unit is in operation, the acknowledge screen for unit stop is displayed.
Advice
2
When two or more IUs are connected to the R/C, a list of IUs is
displayed. Tap the IU to be set.
IU select
Next
Back
Select an IU address.
PJZ012A176_EN.indd 28
2018/07/04 16:42:23
