－
40
－
■
Operation of each timer
・
Sleep timer (
☞
page 22)
Stops the operation of the unit when the amount of time set has elapsed since the start of the operation. When the setting is enabled,
this timer will activate whenever any operation starts.
・
Set ON timer by hour (
☞
page 41)
When the set time elapses, the air conditioner starts.
Operating conditions at the start of operation can be set.
Operation takes place once at each setting.
・
Set OFF timer by hour (
☞
page 42)
When the set time elapses, the air conditioner stops.
Operation takes place once at each setting.
・
Set ON timer by clock (
☞
page 43)
The air conditioner starts at the set time.
Operating conditions at the start of operation can be set.
Only one day (Once) operation or operation Everyday can be set.
・
Set OFF timer by clock (
☞
page 43)
The air conditioner stops at the set time.
Only one day (Once) operation or operation Everyday can be set
・
Weekly timer (
☞
page 44)
On timer and Off timer on weekly basis can be set.
■
Setting of each timer can be combined. Allowable combination settings are as shown below.
Allowable combination setting (
○
: Allowed,
╳
: Prohibited)
Sleep
OFF: Hours
ON: Hours
OFF: Clock
ON: Clock
Weekly
Sleep
×
×
○
○
○
OFF: Hours
×
×
×
×
×
ON: Hours
×
×
×
×
×
OFF: Clock
○
×
×
○
×
ON: Clock
○
×
×
○
×
Weekly
○
×
×
×
×
If a prohibited combination setting is made, a message “The combination can't be accepted” is displayed for 3 seconds.
■
Priority order of the timer settings (
①→③
) is as follows.
①
Set OFF timer by hour/clock, weekly OFF timer
②
Sleep timer
③
Set ON timer by hour/clock, weekly ON timer
■
On the TOP screen, the timer is displayed from the earliest one out of OFF time of the sleep timer, ON time and OFF time.
PJZ012A176_EN.indd 40
2018/07/04 16:42:29
