Mitsubishi Electric Got 1000, User Manual

Page: 75 / 310

8. OPTION
8.10 Panel-Mounted USB Port Extension
8 - 15
1
OV
E
R
VI
EW
2
S
YSTE
M
CONF
IGURA
TION
3
SPEC
IFI
CA
TIO
NS
4
PA
R
T
S
N
A
M
E
5
UL, cUL ST
ANDARDS AND
EMC DIRECTIVE
6
IN
ST
AL
L
A
TI
ON
7
WIRING
8
OP
TI
ON

Precautions on installing the panel-mounted USB port extension
(1) Run power lines, servo amplifier drive wires, and panel-mounted USB port extensions so that they do not cross
each other.
(2) Install the panel-mounted USB port extension away from noise sources such as equipment.
(3) Do not twist, bend at a sharp angle or a right angle, and stretch the panel-mounted USB port extension since the
cable may be broken.
(4) Install it while considering the following control panel inside dimensions.
• Dimension between the back of the GOT and structures
• Dimension of the protruding cable
(5) Insert the USB plug part of the tip of the panel-mounted USB port extension securely to the USB port of the
GOT.
Since the USB plug part may be inserted loosely or unplugged by power of vibrations, impacts, or pulling, fix the
cable to the structures inside the panel or the preventive hole from removing for the USB cable of the GOT main
unit by using the banding band or others.
(6) Use the product after checking that the functions and performances operate correctly.
80 (3.15")
or more
80 (3.15") or more