Mitsubishi Electric EB-50GU-A Instruction Book Download Page 2

Page: 2 / 72

1. Introduction

Mitsubishi Electric Corporation’s Centralized Controller EB-50GU-A/EB-50GU-J features functions to allow users

to monitor and operate the air conditioning units from a PC over the LAN.

This Instruction Book explains how to monitor and operate the units connected to the EB-50GU-A/EB-50GU-J

using a Web browser.

For initial settings and function settings, refer to the Instruction Book (Web Browser for Initial Settings).

1-1. Terms Used in This Manual

- "Centralized Controller EB-50GU-A/EB-50GU-J" is referred to as "EB-50."

- "Booster unit" and "Water HEX unit" are referred to as "Air To Water (PWFY) unit."

- "Advanced HVAC CONTROLLER" is referred to as "AHC."

- Screen images used in this manual are from Windows 7

and Internet Explorer 9.0.

Note: Windows is a registered trademark or trademark of Microsoft Corporation in the United States and other countries.

1-2. PC Requirements

Table1-1 PC Requirements

Item

Requirement

CPU

1 GHz or faster

Memory

512 MB or more

Screen resolution

1024 x 768 or higher recommended

Browser

Microsoft

Internet Explorer 8.0

Microsoft

Internet Explorer 9.0

* Java execution environment is required.

(Oracle

Java Plug-in Ver. 1.7.0_11)

* Install Oracle

Java Plug-in that is appropriate for your operating system. When

using a 64-bit Internet Explorer, install a 64-bit Java Plug-in.

* The version of the Oracle

Java Plug-in can be verified by clicking [Java] in the

Control Panel.

On-board LAN port or LAN card

100 BASE-TX

Pointing device

e.g., mouse

Note: Microsoft is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.

Oracle and Java are trademarks or registered trademarks of Oracle Inc. in the United States and/or other countries.

Summary of Contents for EB-50GU-A









































































Search results

Summary of Contents for EB-50GU-A

Reviews:

Related manuals for EB-50GU-A

Brands by name

Popular brands

Mitsubishi Electric EB-50GU-A, Instruction Book

Search results

Summary of Contents for EB-50GU-A

Reviews:

Related manuals for EB-50GU-A

Brands by name

Popular brands