14
4-1-2. Checking the operation conditions of the groups in a given block
In the Block display of the Condition List screen, select a block to display the operation conditions (such as
operation mode, set temperature, and room temperature) of the air conditioning unit groups, LOSSNAY unit
(ventilator) groups, Air To Water (PWFY) unit groups, and general equipment groups in the block.
Block/Overview
Number of units in error
Number of units whose
filter sign is turned on
Group icons
The icons indicate the
operation conditions of
groups.
Click the icon to switch to
the operation screen.
Update
Click to show the most
recent operation conditions.
Batch Operations
Click to operate the units in
all groups in a given block at
once.
Set temperature
Room temperature
Room humidity
Block selection
Operation mode
Group name
Item
Description
Block/Overview
Click [Block] to display the operation conditions of groups per block, and click [Overview]
to display the operation conditions of all groups.
Update
Click to show the most recent operation conditions.
When [Auto] is selected, the operation conditions are updated automatically every minute.
Batch Operations
Click to operate the units in all groups in a given block at once. (See section 4-1-4.)
Block selection
Select a block you want to monitor.
Group icons
Each group icon indicates the operation condition of the group. Clicking the icon will bring
up the operation screen.
Group name
The name of the group will appear.
Operation mode
The operation mode of the group will appear.
Set temperature
The set temperature of the group will appear.
Note: For Air To Water (PWFY) unit groups, the set water temperature will appear.
Note: The temperature unit (°C or °F) can be selected on the Basic System settings screen,
accessible via the Web Browser for Initial Settings.
Room temperature
Indoor unit return air temperature will appear.
Note: The temperature shown may be different from the actual room temperature.
Note: Whether to show or hide the room temperature can be set on the Basic System settings
screen, accessible via the Web Browser for Initial Settings.
Note: For Air To Water (PWFY) unit groups, the current water temperature will appear.
Note: The temperature unit (°C or °F) can be selected on the Basic System settings screen,
accessible via the Web Browser for Initial Settings.
Room humidity
The reading of the indoor unit return air humidity or the humidity sensor on the ME remote
controller (Smart ME controller) will appear.
Note: The value will not appear if the indoor unit does not have a humidity measurement function.
Note: If a ME remote controller (Smart ME controller) is connected to the group and the built-in
humidity sensor is enabled, the reading of the sensor will appear.
Note: The indoor unit return air humidity has priority to be displayed over the reading of the
humidity sensor on the ME remote controller (Smart ME controller).
