18
4-1-4. Operating the units in a given block
(1) In the Block display of the Condition List screen, select a block to
operate, and click [Batch Operations].
If air conditioner group, LOSSNAY unit (ventilator) group, Air To Water
(PWFY) unit group, and general equipment group exist together in
the same block, a screen to select a group type will appear.
Click one of the group types to change its settings.
(2) On the operation settings screen, change the desired settings and
click [OK] to reflect the changes.
Click [Cancel] to return to the previous screen without making any
changes.
Note: When the filter sign is reset on this screen, the cumulative operation
time of all units will be reset, irrespective of whether or not the filter
sign was triggered. Reset the filter sign on this screen when the
filters of all units were cleaned at once.
4-1-5. Operating the units in all groups
(1) In the Overview display of the Condition List screen, click [Batch
Operations]. If air conditioner group, LOSSNAY unit (ventilator)
group, Air To Water (PWFY) unit group, and general equipment group
exist together in the same system, a screen to select a group type
will appear.
Click one of the group types to change its settings.
(2) On the operation settings screen, change the desired settings and
click [OK] to reflect the changes.
Click [Cancel] to return to the previous screen without making any
changes.
Note: When the filter sign is reset on this screen, the cumulative operation
time of all units will be reset, irrespective of whether or not the filter
sign was triggered. Reset the filter sign on this screen when the
filters of all units were cleaned at once.
