62
Item
Description
Energy management
data
■ File output destination
[Save destination]\[Serial No.]\OperationalData\EnergyManagementData\[Date]
Note: The date will appear in the format that has been set on the Basic System settings screen,
accessible via the Web Browser for Initial Settings.
■ File format
[Data type: 5-minute intervals]
Row
Item
Format
1st
File Type
501
2nd
Data range
*1
Start date + "–" + End date
3rd
Item
*5
"DateTime,Data1(51),...Data1(100),Data2(51),...Data2(100),
Data3(51),...Data3(100),OutdoorTemp(51),...OutdoorTemp(100),
CoolSetTemp(1),...CoolSetTemp(50),HeatSetTemp(1),...HeatSetTemp(50),
RoomTemp(1),...RoomTemp(50),MCP1(1),...MCP1(50),
MCP2(1),...MCP2(50),MCP3(1),...MCP3(50),MCP4(1),...MCP4(50),
MCT1(1),...MCT1(50),MCT2(1),...MCT2(50),
AHC1(201),...AHC1(250),AHC2(201),...AHC2(250)"
4th
Measurement
unit
*2*3*4*5
Item
Unit
Data1, Data2, Data3
-
OutdoorTemp, CoolSetTemp, HeatSetTemp,
RoomTemp
ºC, ºF
MCP (PI controller)
kWh, m3, MJ
MCT (AI controller)
ºC, ºF, %
AHC (Advanced HVAC CONTROLLER)
ºC, ºF
5th–
17860th
Data
*5*6*7
Date
*1
and time, Data 1 (51), ... (100), Data 2 (51), ... (100), Data 3 (51), ... (100),
Outdoor temperature (51), ... (100),Cooling set temperature (1), ... (50),
Heating set temperature (1) , ... (50),Room temperature (1), ... (50),
MCP 1 (1), ... (50), MCP 2 (1), ... (50), MCP 3 (1), ... (50), MCP 4 (1), ... (50),
MCT 1 (1), ... (50), MCT 2 (1), ... (50),AHC temperature 1 (201), ... (250),
AHC temperature 2 (201), ... (250)
*1 The date will appear in the format that has been set on the Basic System settings screen, accessible
via the Web Browser for Initial Settings.
*2 The temperature unit °C or °F will appear, depending on the temperature unit that has been selected
on the Basic System settings screen, accessible via the Web Browser for Initial Settings.
*3 The measurement unit for MCP (PI controller) will be the measurement unit that has been set on the
Measurement screen, accessible via the Web Browser for Initial Settings.
*4 The measurement item for MCT (AI controller) will be temperature or humidity, which has been set
on the Measurement screen, accessible via the Web Browser for Initial Settings.
*5 The separator character and decimal point character selected on the Measurement screen (accessible
via the Web Browser for Initial Settings) will be used to the data.
*6 The value will not appear if the data does not exist.
*7 Each file contains up to 17856 data (2-month worth of data).
