manualshive.com logo in svg

Mitel 6867 SIP, User Manual

Share
Download
Mitel 6867 SIP User Manual Download Page 77

 Personalizing your phone

Mitel 6867 SIP / Mitel 6869 SIP

77

eud-1664/1.1 – R4.0 – 07.2015

Configuring general phone settings

This section explains other settings you can make on your phone.

Selecting the language

You wish to select a different user language for your display.

To change both the local user language and the user language of the 
MiVoice Office 400 communication system, configure the language set-
tings for your phone over the Self Service Portal. For more information 
about the Self Service Portal, please refer to "MiVoice Office 400 Self Ser-
vice Portal", page  8.

The language selection is limited to five languages. If the language you 
want is not available, then your system administrator can upload additional 
language packs. English is the standard language and is contained in 
every language pack.

Selecting the time and date

The settings for the time and date are made by your system administrator. 
The following chapter is thus intended for your system administrator or 
technician, who will then set the time and date for you.

Press the Option key.

Scroll to 

Audio

.

Setting the audio mode:

1. Scroll down to 

Audio Mode

 using the navigation key and confirm with the 

selection key.

2. Select the mode you want and confirm with the 

Save

 softkey.

Setting the headset:

1. Scroll down to 

Headset

 using the navigation key and confirm with the selec-

tion key.

2. Select the volume you want or DHSG and confirm with the 

Save

 softkey.

Summary of Contents for 6867 SIP






































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands