40
Mitel 6867 SIP / Mitel 6869 SIP
eud-1664/1.1 – R4.0 – 07.2015
Phoning
Hide number
You do not want your call number to appear on the terminal display of a
called party in the public network. The following options are available here:
This function must be saved to a configurable function key with Self Service
Portal (see chapter "Configuring or deleting a key assignment", page 88).
Notes:
• Your call number can only be hidden if you select an external call number.
• This feature depends on the range of services offered by your provider.
Putting a call partner on hold
You want to briefly interrupt the active call.
You can put the call party on hold and then take them back again on the
same phone.
Menu
Description
Permanent
The call number is never displayed.
Per call
Call number should only be restricted for certain calls.
This function must be activated before dialling the call
number.
Activating/deactivating calling line identification restriction permanently:
Press the function key for
Hide number
.
➔
Function is activated/deactivated, LED on the function key is switched on/off.
Activating CLIR per call:
1. Press the function key for
Hide number
.
2. Enter the call number and press the
Select
softkey.
➔
Call number is dialled and your own number is not displayed to the called
party.
Putting the active call party on hold:
Press the Hold key.
➔
The call party is put on hold, is displayed and the LED on the line key
flashes.
Take back the call party on hold:
Press the Hold key, the flashing line key or the
Pick up
.
➔
The call is active again.
