Mitel 6867 SIP User Manual Download Page 74

Page: 74 / 101

Mitel 6867 SIP / Mitel 6869 SIP

eud-1664/1.1 – R4.0 – 07.2015

Personalizing your phone

Configuring the display

This section explains how to set display properties.

Setting the display

You may find the display is too bright or too dark.

Display

Description

Home Screen

Setting possibilities for the idle screen.

• Home screen mode Select from two different idle screens.

•

Screen Saver Timer

Time in seconds (0-7200 seconds) for which the back-
light should remain activated before the screen saver is
displayed.

Brightness

Setting possibilities for the screen brightness.

•

Brightness Level

Display brightness of level 1 (dark) to 5 (bright).

•

Brightness Timer

Time in seconds (1-7200 seconds) for which the back-
light is to remain on in the idle state. After this time the
brightness is dimmed. Default value is 600 seconds
(10 minutes).

Press the Option key.

Scroll to

Display

and press the selection key.

Setting home screen mode:

Set the desired mode using the horizontal navigation key and confirm with the

Save

softkey.

Setting the duration for the screen saver:

Enter the time in seconds in the input field and confirm with the

Save

softkey.

Setting the brightness:

Set the desired brightness level using the horizontal navigation key and confirm
with the

Save

softkey.

Setting the duration for brightness:

Enter the time in seconds in the input field and confirm with the

Save

softkey.

Summary of Contents for 6867 SIP






































































































Search results

Summary of Contents for 6867 SIP

Reviews:

Related manuals for 6867 SIP

Brands by name

Popular brands

Mitel 6867 SIP, User Manual

Search results

Summary of Contents for 6867 SIP

Reviews:

Related manuals for 6867 SIP

Brands by name

Popular brands