46
Mitel 6867 SIP / Mitel 6869 SIP
eud-1664/1.1 – R4.0 – 07.2015
Phoning
Receiving an announcement
You will be alerted to the announcement with two short signal tones and
spoken to directly via the loudspeaker across a one-sided connection. The
display shows
Announcement from
.
In order to be able to receive an announcement, your phone must be nei-
ther in use nor locked against announcements (configuration see chapter
"Activating protection against call types", page 81). To answer the
announcement, the following options are available to you:
• You can continue the announcement as a phone call by picking up the
handset.
• You can stop the announcement.
Announcement to a group:
• The announcement will only be received by phones which both have
authorisation to receive announcements and are not in use.
• As soon as a user in a group picks up the handset to answer the
announcement, the announcement is ended for all other users in the
group.
• If receipt of announcements is not authorised on any of the phones in
the announcement group or all the phones are in use, you will hear the
busy tone.
• Group announcements are always conducted with a one-sided connec-
tion.
You will be alerted to the announcement with two short signal tones and
spoken to directly via the loudspeaker.
Continue an announcement as a phone call:
Pick up the handset.
➔
You are on the phone with whoever started the announcement.
Note:
If the announcement was started to the group, all other recipients of the
announcement will be excluded.
Stop announcement:
Press the End key.
