Mitel 6867 SIP User Manual Download Page 68 | Manualshive

Page: 68 / 101

background image

68

Mitel 6867 SIP / Mitel 6869 SIP

eud-1664/1.1 – R4.0 – 07.2015

Phoning

Note:

• More options with the busy lamp field that are not described here can

be found with the corresponding function.

• A busy lamp field can only be saved on function keys T1 to T20

(Mitel 6867 SIP) or function keys T1 to T40 (Mitel 6869 SIP).

To be able to use the busy lamp field key, it must have been configured as
such with the call number of the team partner, either by your system
administrator or by yourself in the Self Service Portal (see chapter "Config-
uring keys", page 86).

Calling a team partner

You want to call a team partner as quickly as possible.

Answering a call for a team partner

Your team partner is called. The LED on the busy lamp field key flashes.
You know that your team partner is not at his desk at present and therefore
decide to answer the call.

You take over the call by pressing the busy lamp field key. As soon as you
have answered the call, your team partner is free again.

Check presence status:

1. Press the info key.
2. Press the desired busy lamp field key.

➔

The phone status of the team partner is displayed.

Note:

Press another busy lamp field key to receive additional contact information.

Calling a team partner:

Press the selection key to call the team partner.

Calling a team partner:

Press the busy lamp field key of the team partner.

➔

The phone number and possibly the name of the team partner appear on the

display. The team partner is called.

«
...
66
67
68
69
70
...
»

Summary of Contents for 6867 SIP






































































































Reviews:

No comments

Related manuals for 6867 SIP

Brand: Panasonic Pages: 100

Brand: Panasonic Pages: 5

Brand: Panasonic Pages: 12

Brand: Panasonic Pages: 6

Brand: Panasonic Pages: 12

Brand: UMX Pages: 56

Brand: Cellon Pages: 87

Brand: Yealink Pages: 12

Brand: Sangoma Pages: 9

Brand: Novatel Pages: 25

Brand: Hanlong Pages: 68

Brand: Alcatel Pages: 84

Brand: Ericsson Pages: 71

Brand: Yarvik Pages: 515

Brand: SoftBank Pages: 352

Brand: IPRO Pages: 24

Brand: Mitel Pages: 29

Brand: Sigma Pages: 52

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands