Mitel 6867 SIP User Manual Download Page 75

Page: 75 / 101

Personalizing your phone

Mitel 6867 SIP / Mitel 6869 SIP

eud-1664/1.1 – R4.0 – 07.2015

Configuring the audio properties

This section explains how to set audio properties.

Adjusting the volume

You want to change the volume of the ring tone or the handset during a call.

Ring volume:

You can adjust the volume in the idle state or when the ring

tone sounds. Press and hold the volume down button to switch off the ring
tone completely.

Handset volume:

You need to set the volume of handset and loudspeaker

separately. The new volume will remain saved even after the call is ended.

Setting the ringing properties

You want to change the way in which your phone rings.

Available settings:

Adjusting the volume (in idle state, during ringing phase/call):

Quieter: Press the key.
Louder: Press the key.

Ring tones

Description

Ring tone

•

Ring tone 1...15

Selection of available ring melodies.

•

Silent

If you do not want to be disturbed during a certain time,
you can set your phone not to ring with Suppress ring
tone.

Tone set

Country-specific ring tone settings. This menu is set by
your system administrator.

Setting the ring:

Press the Option key.

Scroll to

Audio

Summary of Contents for 6867 SIP






































































































Search results

Summary of Contents for 6867 SIP

Reviews:

Related manuals for 6867 SIP

Brands by name

Popular brands

Mitel 6867 SIP, User Manual

Search results

Summary of Contents for 6867 SIP

Reviews:

Related manuals for 6867 SIP

Brands by name

Popular brands