© Copyright
MINOS DIS TICARET LIMITED SIRKETI., 2017. All rights reserved. Reprinting, even of sections, only possible with the approval of
MINOS DIS TICARET LIMITED SIRKETI.
Document No: T-DYKM 1,5-2.2018_I.O.M./ Tarih: 09.07.2018
The Lubrication Points
Greasing Interval
No Description
1
Discharge cover piston bushing
Grease every 20 hours.
Table 8- The lubrication scheme
/
The lubrication points and greasing interval on the machine.
Gearbox:
After the first 50 hours of operation, drain initial oil, preferably warm.
To drain the oil remove the drain plug located on the bottom of the gearbox.
Flush out the gearbox with an approved non-flammable, non toxic solvent and
refill with
GEAR OIL SAE140EP/3.5
from the place which is shown in Figure 18.1
to level of the sight plug. (Figure 18.2)
Figure 18-
The Gearbox
CHECK EVERY 20 HOURS
oil levels in gearbox. If needed, add appropriate oil
until it reaches the level of the sight plug.
Thereafter oil should be changed
every 2000 hours or 12 months
, whichever
comes first.
If machine usage is severe or more than 10 loads per day it is
advisable to change the oil every 1000 hours or 6 months.
Inspect and wash oil
reservoir breather cap as needed. Air dry before reinstalling.
THE LUBRICANT OIL MUST ALWAYS BE OF THE SAME QUALITY
AND THE SAME BRAND.
46
