![MINOS T-DYKM 1,5 Introducing & Operating Manual Download Page 36](http://html.mh-extra.com/html/minos/t-dykm-1-5/t-dykm-1-5_introducing-and-operating-manual_1803634036.webp)
© Copyright
MINOS DIS TICARET LIMITED SIRKETI., 2017. All rights reserved. Reprinting, even of sections, only possible with the approval of
MINOS DIS TICARET LIMITED SIRKETI.
Document No: T-DYKM 1,5-2.2018_I.O.M./ Tarih: 09.07.2018
●
Small chains are supplied with the driveline. They must be attached to the
inner and outer driveline shields and to the tiller and tractor to restrict shield
rotation. (Figure 12)
Figure 12- PTO shaft
safety chain connection.
If any of these items are not running as indicated, immediately
repair or contact your authorised service provider and sales representative or
directly with our firm. Always refer to operating safety precautions before
operating or servicing the mixer.
1. Check for proper assembly, adjustment, and lubrication. One of the most
important things an operator can do for mixer feeder is to make sure it is
properly lubricated. Check to see that there is adequate oil in the gearbox.
Check to be sure all bolts and set screws are tight. Review Operating Safety
Precautions and Lubrication Instructions before operating the mixer.
2. Be sure all shields are properly in place.
3. Check for and remove any foreign objects in the mixer hopper and discharge
opening.
4. Check to see that the discharge cover is closed.
5. Be sure no one is inside the mixer.
6. Test run the mixer.
3.4- Before The Verticalal Mixer-Feeder Run-in
(only for implements driven by a P.T.O Shaft)
28