© Copyright
MINOS DIS TICARET LIMITED SIRKETI., 2017. All rights reserved. Reprinting, even of sections, only possible with the approval of
MINOS DIS TICARET LIMITED SIRKETI.
Document No: T-DYKM 1,5-2.2018_I.O.M./ Tarih: 09.07.2018
● Never hand feed materials into mixer while it is running.
Auger inside mixer
may not be visible From the loading point, and may cut or grab hands, clothing,
or material being loaded, causing severe injury. Always stop engine before
hand loading materials.
● Never attempt to release jammed materials or clean materials from any area
of the mixer or discharge chute without stopping engine and removing
driveline first. Moving parts can be hidden by materials, and stopped parts can
start unexpectedly, causing severe injury. Always stop engine and remove PTO
driveline before attempting to remove jammed material or to clean.
● Do not allow operation of this unit by inexperienced and unqualified people.
Keep all unqualified people away from mixer during loading and operation.
Operators of this unit must be alert and use good judgement at all times.
● Operator should not climb on ladder or any part of the mixer when loading,
mixing or discharging material.
● Do not wear loose or floppy clothing while operating this unit. Loose clothing
may become entangled in moving parts. Clothes should fit tight to the user's
body.
● Be sure the inside of the mixer is clear of any obstructions and that all shields
are in place before operating. Repair or replace any damaged or missing
● NEVER put arms or feet ınsıde unit, power chute, or discharge door
opening, nor climb on or in the mixer while it is running. NEVER allow
anyone to position themselves over or near the top of the mixer while it is
running. Augers, shafts, and material can grab clothing or create pinch
points which can cause severe injury or death to the operator or
bystanders. Always stop engine and remove the P.T.O. Shaft so that the
mixer cannot be accidentally turned on while inspecting, servicing,
repairing, or cleaning mixer.
3
