© Copyright
MINOS DIS TICARET LIMITED SIRKETI., 2017. All rights reserved. Reprinting, even of sections, only possible with the approval of
MINOS DIS TICARET LIMITED SIRKETI.
Document No: T-DYKM 1,5-2.2018_I.O.M./ Tarih: 09.07.2018
The Minos Vertical Mixer-Feeder has been designed to require minimum
maintenance. However, in order to periodic maintain its optimum
performance, protect its warranty, increase its lifetime and enhance its resale
value, it is important for the vehicle to be maintained in line with the
manufacturer’s recommendations.
The machine may only be maintained and repaired by persons who are
appointed to do this and who are familiar with the instructions for safe work,
with settings and with maintenance of the machine.
All conditions for maintenance and repair, prescribed by the manufacturer,
should strictly be considered. The following recommendations should be
helpful:
● Maintenance and repairs may only be executed when the drive and the
engine are switched off and the ignition key is pulled out.
●
When repairing the mixer feeder use adequate tools and original Minos spare
parts only.
The precision and high-quality construction of each original Minos
spare part guarantees that all components in your mixer feeder work together
perfectly for optimum performance and maximum safety and longevity.
● If you perform any maintenance on the lifted implement, always secure the
implement by a suitable holder.
43
5- PERIODIC MAINTENANCE AND REPAIR
● READ ALL WARNINGS AND INSTRUCTIONS FOR SAFE MAINTENANCE AND
REPAIR IN THIS MANUAL BEFORE PREPARING OR OPERATING THE MINOS
MIXER-FEEDER!
It is the responsibility of the owner to make sure the mixer
is maintenance and repair properly.
(See section 1.6 & 1.7)