© Copyright
MINOS DIS TICARET LIMITED SIRKETI., 2017. All rights reserved. Reprinting, even of sections, only possible with the approval of
MINOS DIS TICARET LIMITED SIRKETI.
Document No: T-DYKM 1,5-2.2018_I.O.M./ Tarih: 09.07.2018
Materials
The Minos Vertical Mixer-Feeder is designed to mix a wide variety of feedstuffs
efficiently and quickly. After the long stem forages are coarsely cut in the
processing step, other materials such as silage, grains, haylage, and
commodities can be added and mixed.
Loading Sequence
With mixer running at approximately 3/4 of rated PTO RPM, and the long stem
material processed to a desirable length, the loading of remaining ingredients
can begin.
4.3.2- Step 2 (Mixing)
(only for implements driven by a P.T.O Shaft)
●
NEVER attempt to release to release jammed materials or clean materials
from any area of the mixer or discharge unite without stopping engine and
removing driveline first. Moving parts and knives can be hidden by
materials, and stopped parts can start unexpectedly, causing severe injury.
Always stop engine and remove ignition key before attempting to remove
jammed material or clean.
● DO NOT allow operation of this unit by inexperienced and unqualified
people. Keep all unqualified people away from mixer during loading and
operation. Operators of this unit must be alert and use good judgement at
all times. Operator SHOULD NOT climb on ladder or any part of the mixer
when loading, mixing or dischargingmaterial.
● Keep in mind the overall size of the mixer to allow clearance through
doorways, make sure the chute is in the up position and there is adequate
side and top clearance through doorway.
35
