© Copyright
MINOS DIS TICARET LIMITED SIRKETI., 2017. All rights reserved. Reprinting, even of sections, only possible with the approval of
MINOS DIS TICARET LIMITED SIRKETI.
Document No: T-DYKM 1,5-2.2018_I.O.M./ Tarih: 09.07.2018
● Stop the engine, securely park the tractor, set the brakes.
● First attach left draft arm (Figure 5.B) to the implement hitch point using the
proper size hitch pin and security clip. Right draft arm (Figure 5.C) is adjustable
and is connected next.
● Remount and start the tractor to use the hydraulic system to raise the lift
arms (Figure 5.D, E) if needed.
● Match the top link (Figure 5.A) of the 3- point hitch to the implement’s upper
hitch point (Figure 4.3). Raise the lift arms (Figure 5.D, E) to lengthen, or drive
ahead with implement down to shorten to adjust if needed. The implement
may not be level if the upper link (Figure 5.A) has been adjusted too many
times. If it is out of level, the machine may not work properly If you cannot
level the machine, ask for help.
● Securely attach the upper hitch pin with the proper size hitch pin and security
clip.
Figure 4- Implement 3-Point hitch points Figure 5- Parts of the tractor 3-Point Hitch
Hitch Category Tractor HP
Diameter of
Lower Link Pin
(mm)
Diameter of
Upper Link Pin
(mm)
1
<47,6 (35 kW)
Ø 21,79-22
(7/8")
Ø 19,3-19,51
(3/4")
Table 6- Upper and lower link pins diameters (ISO 730:2009, Agricultural wheeled tractors - Rear-
mounted three-point linkage - Part 1: Categories 1N, 1, 2 N, 2, 3N, 3 and 4)
* Link pins must fit the link-pin hole without excessive movement.
22
