© Copyright
MINOS DIS TICARET LIMITED SIRKETI., 2017. All rights reserved. Reprinting, even of sections, only possible with the approval of
MINOS DIS TICARET LIMITED SIRKETI.
Document No: T-DYKM 1,5-2.2018_I.O.M./ Tarih: 09.07.2018
● When using two-way PTO shaft take into consideration that RPM depend of
driving speed and rotation direction at reverse drive Invert!
● Make sure that nobody is in the area of danger of the machine before
switching on the P.T.O. Shaft!
● Never switch on the P.T.O. Shaft when the engine is switched off!
● When working with the P.T.O. Shaft nobody is allowed to be in the area of
rotating P.T.O. Shaft.
● Always switch off the P.T.O. Shaft when the angle deviation gets too big or
when you do not need it!
●
Attention!
After having switched off the P.T.O. Shaft the danger of rotating
heavier parts remains. Do not get close to the machine untill it comes to a
complete standstill. You can start to work only when the rotation is completely
stopped.
● Cleaning, lubrication or adjusting of the machines, driven by the P.T.O. Shaft,
or a P.T.O. Shaft itself, can be done when the e engine is switched off and the
ignition key is pulled out!
● Disconnected P.T.O. Shaft is to be put onto provided holder!
● When PTO Shaft pulled from the tractor, push the protection cap back on the
drive shaft of the tractor!
● Repair all damages of the P.T.O. Shaft before using the machine!
● Hydraulics is under high pressure!
● When connecting the oil pump, oil tank, hydraulic cylinders and hydraulic
motors, take care about the correct connection of hydraulic hoses!
1.6- Hydraulics
(only for implements driven by a P.T.O Shaft)
9
