© Copyright
MINOS DIS TICARET LIMITED SIRKETI., 2017. All rights reserved. Reprinting, even of sections, only possible with the approval of
MINOS DIS TICARET LIMITED SIRKETI.
Document No: T-DYKM 1,5-2.2018_I.O.M./ Tarih: 09.07.2018
One of the most important things an operator can do for mixer feeder is to
make sure it is properly lubricated.
So a lubricant is a substance that reduces friction, heat, and wear when
introduced as a film between solid surfaces. Using the correct lubricant helps
maximize the life of machine component, therefore saving money, time, and
manpower, thus making operations more efficient and more reliable.
When lubricating, follow the instructions from the lubrication scheme. (Table 8)
Marked lubricating points should be lubricated with organic based grease.
(Figure17)
● Always disengage the P.T.O. Shaft before lubricating the machine.
● Take care to use organic based grease.
Figure 17-
The Lubricating Points on the mixer.
5.2- Lubrication
(only for implements driven by a P.T.O Shaft)
45